Power hammer

Have a question about blacksmithing? Need some help with a project? Ask here.
Post Reply
Phillip5505
Posts: 16
Joined: Wed Aug 24, 2016 11:20 pm

Power hammer

Unread post by Phillip5505 » Mon Jul 08, 2019 2:19 pm

I'm looking for info on little giant power hammers my local historical society has 3 in a small blacksmith building and they are looking for info and prices to possibly sell one or 2 and I was asked for help 2 of them are little giants and the other I am not shure of any information sources would be great

Thanks Phil

Phillip5505
Posts: 16
Joined: Wed Aug 24, 2016 11:20 pm

Re: Power hammer

Unread post by Phillip5505 » Mon Jul 08, 2019 2:22 pm

20190621_151730.jpg
This one I don't know
20190621_151730.jpg (5.3 MiB) Viewed 1002 times
20190621_151904.jpg
20190621_151904.jpg (4.29 MiB) Viewed 1002 times
20190621_151911.jpg
20190621_151911.jpg (3.48 MiB) Viewed 1002 times

Martin Pansch
Posts: 312
Joined: Thu Feb 14, 2013 10:44 am
Location: Young America, MN

Re: Power hammer

Unread post by Martin Pansch » Tue Jul 16, 2019 3:47 pm

Hi Phil,

Power hammer prices are fairly high right now due The he surge in interest from Forged in Fire. I’ve heard of some truly stupid prices being paid. Still, much depends on condition. The further it is from being “plug and play” the less money you’ll get and the smaller the buyer pool, not everyone is capable or interested in rebuilding a hammer. With the few photos you posted no one would be able to hazard an accurate guess. Conditions of the dies, whether the guides are worn out, whether the Babbitt is shot, broken springs or toggle arms, etc are all signs that you are selling a project versus a tool. Cracks in the cast iron, depending on size and location, could mean you are selling a lawn ornament versus a project.

I’ll look up the Novelty Iron Works I’m Pounding Out the Profits when I get home. I don’t recall seeing one of those either but I was surprised at how many manufacturers there where beyond the handful of big names.

You can contact Little Giant in Nebraska with the serial number and they can tell you when it was made and who it was sold to as well as addressing rehabbing it. They might be able to advise on the market for them too.

Www.littlegianthammer.com

Post Reply

Return to “Blacksmithing General Discussion Area”