Hey folks!
So I had the opportunity to snag one of Aaron's gorgeous hammers, all of which are a work of art, mostly because I wanted to say I owned one (it was too heavy for me, and I knew they going in) but instead of it sitting around the shop until I'm strong enough to use it, I thought someone else might be able to get use out of this work of art, and I could pick up some of the stuff I need to get on my feet as a blacksmith.
So, without further ado, here was the original listing:
https://m.facebook.com/cergolforge/phot ... 7188262815
Anyone who has been following knows two things. First off, this was a great deal on one of Aaron's hammers, and second, that they're worth every penny.
This bad boy is 3.5 pounds with a wide cross peen. 16 handle, nice crowned face. It moves metal, and will last the rest of your life.
So what am I looking for?
Tongs, really. I need something that can hold 1 inch square stock, and 1 & 3/4 square stock. If you could hook me up with both of those, this beauty is yours
Otherwise, anything but flat jaw tongs is good for me, Im struggling without much of anything. Additionally, I could use some more hammers in the 2lb - 2.5lb range. Cross peen, straight peen, rounder. Basic stuff. I'd be interested in hardy tools as well, and a nice pair of scrolling tongs. If you have something that'll help me out, shoot me an email at phoenixcreations@hotmail.com or reply down below for more info.
Cheers!
Offer a trade - My Aaron Cergol hammer for your tongs/hammers
-
- Posts: 38
- Joined: Sat Feb 28, 2015 10:30 pm
Offer a trade - My Aaron Cergol hammer for your tongs/hammers
Unread post by Calmb4tehpwn » Sun May 31, 2015 12:25 pm
Jump to
- General Information
- ↳ News and Announcements - Welcome to the Guild's web forum!
- ↳ How the Guild got started - by Paul Hubler
- ↳ General Discussion
- ↳ Web forum "How to", Feedback and Suggestions
- ↳ Safety
- ↳ For Sale / For Trade / Wanted / Business Opportunities/ Auctions
- ↳ Introductions - Introduce yourself to the web forum members
- ↳ Metalworking Polls
- Getting Started in Blacksmithing
- ↳ Beginner's Corner
- ↳ My first...
- ↳ Getting started - Questions and Answers
- Blacksmithing
- ↳ Blacksmithing General Discussion Area
- ↳ Projects: Photos and Descriptions
- ↳ Show and Tell
- ↳ Works in Progress
- ↳ "How to" Tutorials
- ↳ Project Design and Layout
- ↳ Forging Techniques
- ↳ Scrolls and scrolling
- ↳ Animal Heads
- ↳ Other Joinery (Rivet, Collar, Tenon)
- ↳ Tools and Toolings
- ↳ Hammers
- ↳ Tongs
- ↳ Hardy Tools
- ↳ Belt Grinders
- ↳ Guillotine Type Tools
- ↳ Other Anvil Tooling
- ↳ Flatters, Butchers, Sets
- ↳ Punches, Drifts, Chisels and Dies
- ↳ Jigs and Fixtures
- ↳ Flypress
- ↳ Forge Welding
- ↳ Heat Treating
- ↳ Anvil, Forge and Vise
- ↳ Anvils
- ↳ Anvil Restoration
- ↳ Anvil Stands
- ↳ Coal Forges
- ↳ Gas Forges
- ↳ Coal
- ↳ Post Leg Vises
- ↳ Post Leg Vise Stands
- ↳ Swage Blocks
- ↳ Power Hammers
- ↳ Little Giant
- ↳ Spare Tire
- ↳ Air Hammers
- ↳ Treadle Hammers
- ↳ Metal Finishes, Patinas and Preservation
- ↳ Materials, Alloys and Metallurgy
- Foundry, Metal Casting and Sculpture
- ↳ Foundry and Metal Casting General Discussion Area
- ↳ Projects: Photos and Descriptions
- ↳ Show and Tell
- ↳ Works in Progress
- ↳ "How to" Tutorials
- ↳ Furnace and Crucible
- ↳ Patterns and Molds
- ↳ Cast Iron
- ↳ Cast Bronze
- Bladesmithing
- ↳ Bladesmithing General Discussion Area
- ↳ Projects: Photos and Descriptions
- ↳ Show and Tell
- ↳ Works in Progress
- ↳ "How to" Tutorials
- ↳ Design and Layout
- ↳ Tools and Tooling
- ↳ Forging and Hot Work
- ↳ Heat Treating
- ↳ Materials, Alloys and Metallurgy
- ↳ Leather Work
- ↳ Knives and Blades for Sale
- Non-Ferrous Metalworking, Whitesmithing and Jewelry
- ↳ Non-Ferrous Metalworking, Whitesmithing and Jewelry General Discussion Area
- ↳ Projects: Photos and Descriptions
- ↳ Show and Tell
- ↳ Works in Progress
- ↳ "How to" Tutorials
- ↳ Jewelry
- ↳ Repousse and Chasing
- ↳ Copper
- ↳ Bronze
- ↳ Aluminum
- ↳ Titanium
- ↳ Gold and Silver
- ↳ Mokume Gane
- Fabrication and Machining
- ↳ Fabrication and Machining General Discussion Area
- ↳ Projects: Photos and Descriptions
- ↳ Show and Tell
- ↳ Works in Progress
- ↳ "How to" Tutorials
- ↳ Welding and Plasma Cutting
- ↳ Oxy-Acetylene
- ↳ MIG
- ↳ Stick
- ↳ TIG
- ↳ Plasma Cutting
- ↳ Sheet Metal
- ↳ Lathes, Mills, Shapers and Techniques
- ↳ Shop Tools (Saws, Presses, etc.)
- ↳ Electric Power Hand Tools
- ↳ Air Tools
- ↳ Abrasives
- ↳ Chemicals, Solvents, Acids, Oils, etc.
- Around the Shop
- ↳ Shop Photos - Show Off Your Shop!
- ↳ Design, Layout and Building a Shop
- ↳ Tips and Tricks, Hints and Kinks
- ↳ Organization and Storage
- Educational Resources
- ↳ Books
- ↳ Videos
- ↳ Classes
- Events
- ↳ Guild of Metalsmiths Events
- ↳ General Events
- The Guild of Metalsmiths (Guild Members Only Area, must be logged in to access)
- ↳ Guild Announcements
- ↳ The Metalsmith Magazine (back issues)
- ↳ Guide for New Guild Members
- Links
- ↳ Links