Candleholder Archive - assembled by Rich Herman

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Tue Jun 27, 2017 12:18 pm

These files were created by Rich Herman for the Hammer-in at Nowthen in 2017. The theme of the Hammer-in was candleholders and was intended to support the Fall Conference competition fundraiser of making candleholders. These files are the result of Rich's search through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri. He used either the online scanned images from Metalsmith or scanned hard copies he had from Hammers Blow and BAM. These files should be unrestricted for us to post due to the release by ABANA and reuse agreement from all affiliates.

Rich also took scans from some Best of the Bits issues from the Alabama Blacksmith Association. This is a series of books for sale by that group containing articles from their newsletter and Rich believes it should fall under the same category as the above files, but he kept them separate due to possible concerns about this coming from a book they sell.

There is also a document listing projects from Anvilfires iForge group. We are not including the actual articles here since that is a commercial site and we think we should respect them.

There are dozens of individual files, so it might take me a couple days to get them all uploaded. Thanks for your patience! Looking forward to everyone's candleholders at the Fall Conference!

Peter Bettenberg
Communications Chairperson
bettenberg@hotmail.com
651-777-5300
Attachments
AnvilfireiForgeArticles.docx
(5.32 KiB) Downloaded 319 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Wed Jun 28, 2017 3:34 pm

Attached is the first set of three scans from various Best of the Bits issues from the Alabama Blacksmith Association, as scanned by Rich Herman.

_peter_
Attachments
Colonial Chandelier.pdf
(1.4 MiB) Downloaded 361 times
Chandelier Darnell.pdf
(480.48 KiB) Downloaded 343 times
Chamber Candle Darnell.pdf
(422.7 KiB) Downloaded 388 times
Last edited by Peter Bettenberg on Wed Jun 28, 2017 3:37 pm, edited 1 time in total.

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Wed Jun 28, 2017 3:36 pm

Attached is the second set of three scans from various Best of the Bits issues from the Alabama Blacksmith Association, as scanned by Rich Herman.

_peter_
Attachments
Two Light table lamp.pdf
(818.47 KiB) Downloaded 344 times
Shaker Reading Light.pdf
(826.35 KiB) Downloaded 344 times
Leaf Candle Sconce.pdf
(322.07 KiB) Downloaded 320 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 01, 2017 7:29 pm

Attached are the first set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.

_peter_
Attachments
Candle Chandelier Peter Sevin.pdf
(1.29 MiB) Downloaded 360 times
Candle Chandelier Jim McCarty.pdf
(24.47 KiB) Downloaded 320 times
Candle Chandelier Jeryy Darnell.pdf
(515.76 KiB) Downloaded 330 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sun Jul 02, 2017 11:22 pm

Attached are the second set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.

_peter_
Attachments
Candle Cups.pdf
(782.91 KiB) Downloaded 373 times
Candle Holder 2.pdf
(3.53 MiB) Downloaded 364 times
Candle Holder 1.pdf
(1.64 MiB) Downloaded 334 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sun Jul 02, 2017 11:26 pm

Attached are the third set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.

_peter_
Attachments
Miners Lamp 3.pdf
(585.55 KiB) Downloaded 299 times
Miners Lamp 2.pdf
(526.08 KiB) Downloaded 295 times
Miners Lamp 1.pdf
(1.89 MiB) Downloaded 327 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Wed Jul 05, 2017 7:00 am

Attached are the fourth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Night Light.pdf
(30.42 KiB) Downloaded 330 times
Prairie Candle Holder.pdf
(1.04 MiB) Downloaded 363 times
Pineapple Twist Candlestick.pdf
(2.34 MiB) Downloaded 336 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Fri Jul 07, 2017 8:06 am

Attached are the fifth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Courting Candle.pdf
(2.19 MiB) Downloaded 346 times
Chamber Lamp.pdf
(395.59 KiB) Downloaded 309 times
Carl Close Candelabra.pdf
(897.91 KiB) Downloaded 321 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Tue Jul 11, 2017 1:34 pm

Attached is the sixth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Three Scroll candlestick.pdf
(1.95 MiB) Downloaded 385 times
Weavers Candlestick.pdf
(463.68 KiB) Downloaded 286 times
Wall Mounted Candleholder.pdf
(545.47 KiB) Downloaded 309 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Tue Jul 11, 2017 1:37 pm

Attached is the seventh set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Spiral Candle Holder.pdf
(272.56 KiB) Downloaded 339 times
Slavic Candle Holder 2.pdf
(1.2 MiB) Downloaded 335 times
Slavic Candle Holder.pdf
(66.88 KiB) Downloaded 258 times

Post Reply

Return to “Projects: Photos and Descriptions”