Candleholder Archive - assembled by Rich Herman

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 15, 2017 12:09 am

Attached is the eighth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Candle Sconce.pdf
(1.56 MiB) Downloaded 549 times
Candle Holder Pictures 2.pdf
(409.78 KiB) Downloaded 454 times
Candle Holder Pictures 1.pdf
(390.54 KiB) Downloaded 458 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 15, 2017 12:17 am

Attached is the ninth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Colonial Chandelier Hoffman.pdf
(2.29 MiB) Downloaded 503 times
Colonial Candleholder 2.pdf
(550.24 KiB) Downloaded 552 times
Colonial Candleholder 1.pdf
(69.51 KiB) Downloaded 454 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 22, 2017 4:35 am

Attached is the tenth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Double Candle Holder.pdf
(280.77 KiB) Downloaded 480 times
Cruciform Candle Stick.pdf
(704.21 KiB) Downloaded 462 times
Calla Lily Candle Cup.pdf
(7.91 MiB) Downloaded 518 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 22, 2017 4:38 am

Attached is the eleventh set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Williamsburg.pdf
(39.99 KiB) Downloaded 436 times
iron candle.pdf
(254.72 KiB) Downloaded 450 times
Holly Candleholder.pdf
(426.57 KiB) Downloaded 490 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 22, 2017 4:41 am

Attached is the twelfth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Gothic Wall Sconce.pdf
(2.2 MiB) Downloaded 589 times
Fifteenth Century Candleholder.pdf
(2.35 MiB) Downloaded 468 times
Colonial Chandelier.pdf
(1.1 MiB) Downloaded 456 times

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 22, 2017 4:44 am

Attached is the thirteenth set of candleholder documents Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.
Attachments
Candlestick Making.pdf
(2.38 MiB) Downloaded 487 times
Candle Cup Pliers.pdf
(1.01 MiB) Downloaded 440 times
Candle Cup Jig.pdf
(31.07 KiB) Downloaded 454 times
Last edited by Peter Bettenberg on Sat Jul 22, 2017 4:52 am, edited 1 time in total.

Peter Bettenberg
Posts: 21
Joined: Thu Sep 10, 2015 1:47 pm

Re: Candleholder Archive - assembled by Rich Herman

Unread post by Peter Bettenberg » Sat Jul 22, 2017 4:51 am

Attached is the fourteenth (and final) candleholder document Rich Herman found by searching through various project descriptions from Hammers Blow (ABANA), Metalsmith (TGoM), and Newsletter of the Blacksmith Association of Missouri.

This concludes the documents Rich was able to discover in his search of back issues. Know of any designs not included here? Have you come up with a new candleholder design or tool? Feel free to post here!
Attachments
Hammers Blow Candleholder Issue.pdf
(7.47 MiB) Downloaded 526 times

rgoeken
Posts: 2
Joined: Wed Jun 01, 2016 9:26 am

Re: Candleholder Archive - assembled by Rich Herman

Unread post by rgoeken » Wed Aug 02, 2017 10:21 am

Hey, y'all! Thanks to Peter for collecting all these PDFs!

I went ahead and created a shared Dropbox folder so you can grab all the PDFs in a single go.

Candle Holder PDFs:
https://www.dropbox.com/sh/pi426cs4ud4h ... nFTMa?dl=0

I also added links to the URL for each of the Anvilfire iForge articles that were mentioned. It's available in the folder above or you can get there directly with:

https://www.dropbox.com/s/3mkm3qhawudoj ... .html?dl=0

Cheers!

-- Ryan Goeken

Post Reply

Return to “Projects: Photos and Descriptions”