BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//The Guild of Metalsmiths - ECPv6.15.15//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.metalsmith.org
X-WR-CALDESC:Events for The Guild of Metalsmiths
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20230914T080000
DTEND;TZID=America/Chicago:20230914T160000
DTSTAMP:20260404T031426
CREATED:20230729T201403Z
LAST-MODIFIED:20230817T194920Z
UID:5547-1694678400-1694707200@www.metalsmith.org
SUMMARY:2023 TGoM Pre-Conference Class-Day 1 of 2
DESCRIPTION:Instructor: Glenn Horr\, one of our 2023 Fall Conference demonstrators \n2023 Pre-Conference Class project \nClass limit: Max 10 \nCost: $200 for members\, $240 for non-members \nClass Description: This year’s pre-conference class will be making decorative hinges. Glenn Horr\, one of our 2023 Fall Conference demonstrators\, will be showing us the secrets to making decorative and workable hardware based on his years of experience. \nTools & Equipment students should bring to class: Anvil and forge\, tongs for flat stock (box jaw for 1-1/4″ stock)\, cross peen hammer\, 1/4” hole punch\, center punch\, hot cut chisel. optional: rounded edge chisel \,wire brush. \nSafety: Ear protection and goggles. \nLunch: bring a lunch or dine at one of the local establishments in Ellsworth. \nTo register for this class: Send a check written to The Guild of Metalsmiths and your contact info to: \nMarty Masters \n395 Bucher Ave \nShoreview\, MN 55126 \nQuestions? Call Marty at 651-0285-8731 or email mastersmw@yahoo.com \nNote: Acceptance for this class will be in the order sent\, based on the postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/2023-tgom-pre-conference-class-day-1-of-2/
LOCATION:Pierce Country Fairgrounds\, Ellsworth\, WI\, 55033\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
GEO:44.63343;-92.835444
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20230915T080000
DTEND;TZID=America/Chicago:20230915T160000
DTSTAMP:20260404T031426
CREATED:20230729T201926Z
LAST-MODIFIED:20230817T202339Z
UID:5549-1694764800-1694793600@www.metalsmith.org
SUMMARY:2023 TGoM Pre-Conference Class-Day 2 of 2
DESCRIPTION:Instructor: Glenn Horr\, one of our 2023 Fall Conference demonstrators \nClass limit: Max 10 \nClass Description: This year’s pre-conference class will be making decorative hinges. Glenn Horr will be showing us the secrets to making decorative and workable hardware based on his years of experience. \nTools & Equipment students should bring to class: Anvil and forge\, tongs for flat stock (box jaw for 1-1/4″ stock)\, cross peen hammer\, 1/4” hole punch\, center punch\, hot cut chisel. optional: rounded edge chisel \,wire brush. \nSafety: Ear protection and goggles. \nLunch: bring a lunch or dine at one of the local establishments in Ellsworth. \nQuestions? Call Marty Masters at 651-0285-8731 or email mastersmw@yahoo.com \nNote: Acceptance for this class will be in the order sent\, based on the postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/2023-tgom-pre-conference-class-day-2-of-2/
LOCATION:Pierce Country Fairgrounds\, Ellsworth\, WI\, 55033\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
GEO:44.63343;-92.835444
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231007T080000
DTEND;TZID=America/Chicago:20231007T170000
DTSTAMP:20260404T031426
CREATED:20230926T202907Z
LAST-MODIFIED:20231014T190033Z
UID:5578-1696665600-1696698000@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Class-Fall 2023\, Class 1 of 3
DESCRIPTION:Registration for this class is closed.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. The basic classes or proficiency is required before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nThis 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld. \nCost: (covers everything you need: the facility\, coal\, metal tools and workbook)\n$180 for members\, $190 non members\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nLocation:\nThe classes are held on Saturdays at the Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College. \n 
URL:https://www.metalsmith.org/event/beginning-blacksmithing-class-fall-2023-class-1-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231014T080000
DTEND;TZID=America/Chicago:20231014T170000
DTSTAMP:20260404T031426
CREATED:20230926T203037Z
LAST-MODIFIED:20231014T185859Z
UID:5580-1697270400-1697302800@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Class Fall\, 2023-Class 2 of 3
DESCRIPTION:Registration for this class is closed.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. The basic classes or proficiency is required before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nThis 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld. \nCost: (covers everything you need: the facility\, coal\, metal tools and workbook)\n$180 for members\, $190 non members\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nLocation:\nThe classes are held on Saturdays at the Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College. \n 
URL:https://www.metalsmith.org/event/beginning-blacksmithing-class-fall-2023-class-2-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231014T090000
DTEND;TZID=America/Chicago:20231014T163000
DTSTAMP:20260404T031426
CREATED:20230630T203502Z
LAST-MODIFIED:20230630T203502Z
UID:5538-1697274000-1697301000@www.metalsmith.org
SUMMARY:Oxy/Acetylene Welding Class 2023-Day 1 of 2
DESCRIPTION:Oxy/Acetylene Welding 2-day class-Day 1 of 2\nInstructors: Myron Hanson\, Bob Brown\, and Dick Carlson\nMaximum students: 8\nNew to gas welding? Just want to brush up your basic skills? This class focuses on safety and hands-on learning. Students will be working at individual stations on a shared workbench\, with equipment and stock provided. If time permits\, bonus demonstrations will show advanced techniques and uses of the oxyacetylene torch. \nTools & Equipment:\nAll tools\, equipment\, and stock are furnished. \nSafety Equipment:\nStudents should be prepared for sparks and melted/hot metal: common safety garb (leather footwear and clothing made of cotton\, leather\, or wool –no synthetics\, no cuffs or frayed edges) plus eye protection with a #5 lens\, either in a face shield (preferred)\, goggles or glasses. If you wear corrective lenses\, bring those\, too. Cloth cap is optional\, gloves are recommended. \nLunch:\nPack a lunch\, or there are convenience stores/fast food joints in the area. \nTo register\, send a check written to “The Guild of Metalsmiths” and mail\, along with your contact information\, to: \nKim Maas \n965 Gorman Ave. \nWest St. Paul\, MN 55118 \nAcceptance will be in the order sent\, based on the postmark\, and each person will be notified individually. \nQuestions? Email  TGoMvolunteer@gmail.com \n 
URL:https://www.metalsmith.org/event/oxy-acetylene-welding-class-2023-day-1-of-2/
LOCATION:Myron Hanson’s Shop\, 4015 Dodd Rd\, Eagan\, MN\, 55123-1612\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.811273;-93.115724
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Myron Hanson’s Shop 4015 Dodd Rd Eagan MN 55123-1612 United States;X-APPLE-RADIUS=500;X-TITLE=4015 Dodd Rd:geo:-93.115724,44.811273
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231015T090000
DTEND;TZID=America/Chicago:20231015T163000
DTSTAMP:20260404T031426
CREATED:20230630T203704Z
LAST-MODIFIED:20230817T181207Z
UID:5539-1697360400-1697387400@www.metalsmith.org
SUMMARY:Oxy/Acetylene Welding Class 2023-Day 2 of 2
DESCRIPTION:Oxy/Acetylene Welding Class 2023-Day 2 of 2 \nInstructors: Myron Hanson\, Bob Brown\, and Dick Carlson\nMaximum students: 8\nNew to gas welding? Just want to brush up your basic skills? This class focuses on safety and hands-on learning. Students will be working at individual stations on a shared workbench\, with equipment and stock provided. If time permits\, bonus demonstrations will show advanced techniques and uses of the oxyacetylene torch. \nTools & Equipment:\nAll tools\, equipment\, and stock are furnished. \nSafety Equipment:\nStudents should be prepared for sparks and melted/hot metal: common safety garb (leather footwear and clothing made of cotton\, leather\, or wool –no synthetics\, no cuffs or frayed edges) plus eye protection with a #5 lens\, either in a face shield (preferred)\, goggles or glasses. If you wear corrective lenses\, bring those\, too. Cloth cap is optional\, gloves are recommended. \nLunch:\nPack a lunch\, or there are convenience stores/fast food joints in the area. \nTo register\, send a check written to “The Guild of Metalsmiths” and mail\, along with your contact information\, to: \nKim Maas \n965 Gorman Ave. \nWest St. Paul\, MN 55118 \nAcceptance will be in the order sent\, based on the postmark\, and each person will be notified individually. \nQuestions? Email  TGoMvolunteer@gmail.com
URL:https://www.metalsmith.org/event/oxy-acetylene-welding-class-2023-day-2-of-2/
LOCATION:Myron Hanson’s Shop\, 4015 Dodd Rd\, Eagan\, MN\, 55123-1612\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.811273;-93.115724
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Myron Hanson’s Shop 4015 Dodd Rd Eagan MN 55123-1612 United States;X-APPLE-RADIUS=500;X-TITLE=4015 Dodd Rd:geo:-93.115724,44.811273
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231021T080000
DTEND;TZID=America/Chicago:20231021T170000
DTSTAMP:20260404T031426
CREATED:20230926T203215Z
LAST-MODIFIED:20231014T185806Z
UID:5581-1697875200-1697907600@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Class Fall\, 2023-Class 3 of 3
DESCRIPTION:Registration for this class is closed.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. The basic classes or proficiency is required before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nThis 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld. \nCost: (covers everything you need: the facility\, coal\, metal tools and workbook)\n$180 for members\, $190 non members\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nLocation:\nThe classes are held on Saturdays at the Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College.
URL:https://www.metalsmith.org/event/beginning-blacksmithing-class-fall-2023-class-3-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231022T090000
DTEND;TZID=America/Chicago:20231022T170000
DTSTAMP:20260404T031426
CREATED:20230817T170425Z
LAST-MODIFIED:20230817T194521Z
UID:5557-1697965200-1697994000@www.metalsmith.org
SUMMARY:Pipe Tomahawk Class 2023
DESCRIPTION:Pipe Tomahawk \n Instructor: Martin Pansch\,               612-599-4762                    blacksmithingyeti@gmail.com \nClass size: Max 8\, Min 5 \nClass Description: A pipe tomahawk was a ceremonial item for Native American people from the late 17th to late 19th century. Often given as a gift at treaty signings\, it was often a highly decorative item containing symbols of both violence and peace. In this class we will be forging one using mostly traditional techniques. \nStudents will start with a piece of thick walled pipe that is split. We will open the two halves\, shape it around a drift\, and forge weld the halves together. We’ll forge weld a tool steel bit into the cutting end then forge and cut the blade to shape before turning our attention to the pipe end. If time allows we will dive into heat treating and decoration. \nA firm grasp of blacksmithing basics is essential for the best chance of success in this class. Experience with forge welding is helpful as well. \nTools and Equipment or other items participants are to bring to the class. \nA good cross peen hammer (the peen can’t be too sharp)\, rrounding hammer\, hacksaw\, wire brush\, flux\, hot rasp\, hot set/cut\, tongs for holding 1/8” to 3/16” flat\, tongs for holding 1” round might be useful but not necessary. A good half round file and ½” diameter round file if you have them\, in case we get into decoration. If you have a ½” round spring fuller or guillotine tool you can bring that too otherwise we will have several to share. \nSafety Equipment – safety glasses\, ear protections\, work gloves\, long pants\, no open toe shoes\, and no synthetic fiber clothing. A shop apron is suggested as forge welding will be occurring. \nLunch Arrangements: Either bring a bag lunch with you or money to dine at some of the fine dining establishments in the area. \nTo register\, send a check written to The Guild of Metalsmiths\, for $125\, along with your contact info to: \nMarty Masters \n395 Bucher Avenue \nShoreview\, MN 55126 \n(651) 285-8731 \nmastersmw@yahoo.com \nAcceptance priority for this class will be determined by postmark and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/pipe-tomahawk-class-2023/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Martin Pansch":MAILTO:blacksmithingyeti@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231028T083000
DTEND;TZID=America/Chicago:20231028T163000
DTSTAMP:20260404T031426
CREATED:20230817T201136Z
LAST-MODIFIED:20230817T201136Z
UID:5560-1698481800-1698510600@www.metalsmith.org
SUMMARY:Hammer Rack Class 2023-Day 1 of 2
DESCRIPTION:Hammer Rack \n Instructors: Jesse Gavin\, Dave Gavin\, others \nCost: $225 \nClass size: Max 8\, Min 4 \nAre you tired of bending over to pick up that dropped tool or hammer? Yes? Then this is the class for you. We will be leading a class to make a hammer rack with a table top where you can place all of those things that seem to always end up on the floor. \nThis is a project class to be taken after the Intermediate Joinery 1 class. The successful student will slot punch and drift ~13 holes to pass ½” square stock through and assemble a hammer rack with a table top. The table is one foot by two feet. Other sizes can be arranged if planned ahead of time. IF you want the table to be the same height as your anvil – please bring that height. \nThe slot punching will be done in a different way from what was taught in the Joinery class – we will use a treadle hammer. Some old favorites from the beginners class will be revisited:  twisting and riveting. \nClass Champion: Jesse Gavin\njagavin6273@hotmail.com 715-808-5891 \nTools and Equipment or other items participants are to bring to the class: Favorite hammers\, tongs for ½” square stock\, hand files\, 3/8” tenoning tool (if desired)\, Oxy-propane torch – (there will be quite a bit of torch work)\, treadle hammer if you have one that can travel. \nLunch Arrangements: Eat out or bring your own. We do order out from Willy McCoys. \nTo register for this class: Send a check for $225 written to The Guild of Metalsmiths\, along with your contact info\, to: \nJesse Gavin\nN8214 330th Street\nSpring Valley WI  54767 \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/hammer-rack-class-2023-day-1-of-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231029T083000
DTEND;TZID=America/Chicago:20231029T163000
DTSTAMP:20260404T031426
CREATED:20230817T201434Z
LAST-MODIFIED:20230817T201434Z
UID:5564-1698568200-1698597000@www.metalsmith.org
SUMMARY:Hammer Rack Class 2023-Day 2 of 2
DESCRIPTION: Instructors: Jesse Gavin\, Dave Gavin\, others \nClass size: Max 8\, Min 4 \nAre you tired of bending over to pick up that dropped tool or hammer? Yes? Then this is the class for you. We will be leading a class to make a hammer rack with a table top where you can place all of those things that seem to always end up on the floor. \nThis is a project class to be taken after the Intermediate Joinery 1 class. The successful student will slot punch and drift ~13 holes to pass ½” square stock through and assemble a hammer rack with a table top. The table is one foot by two feet. Other sizes can be arranged if planned ahead of time. IF you want the table to be the same height as your anvil – please bring that height. \nThe slot punching will be done in a different way from what was taught in the Joinery class – we will use a treadle hammer. Some old favorites from the beginners class will be revisited:  twisting and riveting. \nClass Champion: Jesse Gavin\njagavin6273@hotmail.com 715-808-5891 \nTools and Equipment or other items participants are to bring to the class: Favorite hammers\, tongs for ½” square stock\, hand files\, 3/8” tenoning tool (if desired)\, Oxy-propane torch – (there will be quite a bit of torch work)\, treadle hammer if you have one that can travel. \nLunch Arrangements: Eat out or bring your own. We do order out from Willy McCoys. \nTo register for this class: Send a check for $225 written to The Guild of Metalsmiths\, along with your contact info\, to: \nJesse Gavin\nN8214 330th Street\nSpring Valley WI  54767 \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/hammer-rack-class-2023-day-2-of-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231118T090000
DTEND;TZID=America/Chicago:20231118T170000
DTSTAMP:20260404T031426
CREATED:20230925T203228Z
LAST-MODIFIED:20231025T192226Z
UID:5577-1700298000-1700326800@www.metalsmith.org
SUMMARY:Trivet Class 2023
DESCRIPTION:Instructors: Derrick Phillips  Phone 651-230-2363\, derrickphillipsa3o3@gmail.com and David Skaurud\nClass size: Maximum 8\, minimum 4 \nClass Description: This class is a beginner plus class. Students will hopefully have finished the beginners class\, as this class will draw on those skills and add some more. The trivet is an introduction to joinery\, forging tenons and using a monkey tool and hot riveting.  This class is the making of a basic trivet\, many variations can be made from this form.  If you think you might be interested in joinery this is a starting project in that direction. \nClass Champion: Derrick Phillips \nTools & Equipment or other items participants should bring to class: Tongs to hold ½” square stock\, and your favorite hammer \nSafety Equipment: the usual for forging with coal: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes \nLunch arrangements: Eat out or bring your own. \nTo register for this class: Send a check for $55 written to The Guild of Metalsmiths\, along with your contact information\, to: \nDerrick Phillips\n2461 Como Avenue\nSt. Paul MN 55108 \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/trivet-class-2023/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Derrick Phillips":MAILTO:derrick_phillips@q.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20231202T080000
DTEND;TZID=America/Chicago:20231202T170000
DTSTAMP:20260404T031426
CREATED:20230926T204221Z
LAST-MODIFIED:20230928T180355Z
UID:5582-1701504000-1701536400@www.metalsmith.org
SUMMARY:Handled Struck Tools 2023
DESCRIPTION:Instructors: Jesse and Dave Gavin and others\nClass size: Max 8\, min 6\nClass champion: Herb Fick\, herb@phyque.com \nClass Description: The tools made will be punches with a wire handle and chisels with a wire handle. We will offer the option to use treadle hammers supplied by the teaching staff. (Find out if you really need one of these by trying them.) Tools for the treadle hammers will be supplied. Steel supplied will be 5/8 and 3/4 inch round 4140 AN for the punches and chisels. Handles will be fabricated from 1/4 and or 5/16 inch round mild steel. \nThe instructor’s goal for the workshop is to produce students comfortable with the process of forging and heat treating tools from nominal tool steel. A secondary goal is to have the students comfortable with the use of treadle hammers. We expect to have three treadle hammers of different styles available. The workshop gives one the ability and confidence to modify and/or repair legacy and or neighbor’s tools. We forge in the morning\, heat treat and install handles after lunch. Much of the time is spent focusing on understanding the heat treat process. There will be enough stock so we can encourage you to make a couple of serious mistakes and still go home with real tools to use. \nMuch of the time is spent focusing on understanding the heat treat process.  There will be enough stock so we can encourage you to make a couple of serious mistakes and still go home with real tools to use or to offer for the next “iron in the hat”.  The photo represents the work product. \nPower grinders are supplied.  Bring your favorite hammers and tongs suitable for the stock if you have them.  So far we have never run out of Guild tools to share.   Bring your basic safety gear (leather\, cotton\, gloves\, eye and ear protection and safety shoes). The building will be open by 8 am\, introductions and coffee will start at 8:30\, in the shop by 9 AM.  We usually finish just before 5 pm. \nHistory:\nThe lead instructor is Jesse Gavin. He is supported by Dave Gavin\, Wayne Olson\, and others. For reference probable students are invited to question former students including:\nGene Thoma\, Bryan Carlson\, Derrick Phillips\, Wayne Olson\, Jim Moenck\, or Bob Brown. \nThis class has been going annually for quite a while and has always filled.  Credit for that goes to the Jesse and Dave. \nTo register: send a check made out to The Guild of Metalsmiths for $85\, along with your contact info\, to: \nHerb Fick\n519 East Eighth Street\nNorthfield MN 55057-2508 \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/handled-struck-tools-2023/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240106T083000
DTEND;TZID=America/Chicago:20240106T170000
DTSTAMP:20260404T031426
CREATED:20231121T203042Z
LAST-MODIFIED:20231121T203042Z
UID:5640-1704529800-1704560400@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Class Winter 2024\, Day 1 of 3
DESCRIPTION:Beginners Blacksmithing 3-day Class January 2024\nRegistration is now open for this series of 3 classes. \nDates: The classes are held on the following Saturdays of January 6\, 13\, 20\, 2024 \nLocation: Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College (see map below). \n \n  \n  \n  \n\nClass Description: This 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. \nThe basic classes or proficiency is REQUIRED before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nClass Size: 8 \nCost: $190 for NON members\, $180 for Guild members (covers everything you need: the facility\, coal\, metal tools and workbook)\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nClass Champion: George Auel at George.Auel@gmail.com \nWhat you need to bring: Eye\, ear and skin protection. This includes safety glasses\, ear muff or plugs and suitable clothing which includes hard shoes\, cotton or leather. Synthetic and polyester clothing will burn and melt. There will be sparks and brushes against hot metal. \nTools: Tools are provided but if you have a favorite hammer\, punches\, chisels and tools\, bring them along. A small 1 to 2 pound ball peen hammer would work. We have various hammers for you to try and get a feel for what is comfortable. \nTypical day: Classes start at 9 but people usually show up earlier to swap stories or show off recent projects. Feel free to bring projects you are working on to show. We break for lunch. \nLunch: You can either bring a brown bag or go out to a local fast food restaurant. Classes end between 3 and 5. \nTo sign up for the three-day Beginners classes:\nSend a check made out to The Guild of Metalsmiths with contact info and email address to:\nGeorge Auel\n1865 Wellesley Ave\nSt. Paul\, MN 55105\nGeorge.Auel@gmail.com \n($180 for members\, $190 non-members) \nAcceptance will be in the order submitted\, based on the transaction date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/beginning-blacksmithing-class-winter-2024-day-1-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240113T083000
DTEND;TZID=America/Chicago:20240113T170000
DTSTAMP:20260404T031426
CREATED:20231121T203224Z
LAST-MODIFIED:20231121T203224Z
UID:5641-1705134600-1705165200@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Class Winter 2024\, Class 2 of 3
DESCRIPTION:Beginners Blacksmithing 3-day Class January 2024\nRegistration is now open for this series of 3 classes. \nDates: The classes are held on the following Saturdays of January 6\, 13\, 20\, 2024 \nLocation: Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College (see map below). \n \n  \n  \n  \n\nClass Description: This 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. \nThe basic classes or proficiency is REQUIRED before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nClass Size: 8 \nCost: $190 for NON members\, $180 for Guild members (covers everything you need: the facility\, coal\, metal tools and workbook)\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nClass Champion: George Auel at George.Auel@gmail.com \nWhat you need to bring: Eye\, ear and skin protection. This includes safety glasses\, ear muff or plugs and suitable clothing which includes hard shoes\, cotton or leather. Synthetic and polyester clothing will burn and melt. There will be sparks and brushes against hot metal. \nTools: Tools are provided but if you have a favorite hammer\, punches\, chisels and tools\, bring them along. A small 1 to 2 pound ball peen hammer would work. We have various hammers for you to try and get a feel for what is comfortable. \nTypical day: Classes start at 9 but people usually show up earlier to swap stories or show off recent projects. Feel free to bring projects you are working on to show. We break for lunch. \nLunch: You can either bring a brown bag or go out to a local fast food restaurant. Classes end between 3 and 5. \nTo sign up for the three-day Beginners classes:\nSend a check made out to The Guild of Metalsmiths with contact info and email address to:\nGeorge Auel\n1865 Wellesley Ave\nSt. Paul\, MN 55105\nGeorge.Auel@gmail.com \n($180 for members\, $190 non-members) \nAcceptance will be in the order submitted\, based on the transaction date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/beginning-blacksmithing-class-winter-2024-class-2-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240120T083000
DTEND;TZID=America/Chicago:20240120T170000
DTSTAMP:20260404T031426
CREATED:20231121T203352Z
LAST-MODIFIED:20231121T203352Z
UID:5642-1705739400-1705770000@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Classes Winter 2024\, Class 3 of 3
DESCRIPTION:Beginners Blacksmithing 3-day Class January 2024\nRegistration is now open for this series of 3 classes. \nDates: The classes are held on the following Saturdays of January 6\, 13\, 20\, 2024 \nLocation: Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College (see map below). \n \n  \n  \n  \n\nClass Description: This 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. \nThe basic classes or proficiency is REQUIRED before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nClass Size: 8 \nCost: $190 for NON members\, $180 for Guild members (covers everything you need: the facility\, coal\, metal tools and workbook)\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nClass Champion: George Auel at George.Auel@gmail.com \nWhat you need to bring: Eye\, ear and skin protection. This includes safety glasses\, ear muff or plugs and suitable clothing which includes hard shoes\, cotton or leather. Synthetic and polyester clothing will burn and melt. There will be sparks and brushes against hot metal. \nTools: Tools are provided but if you have a favorite hammer\, punches\, chisels and tools\, bring them along. A small 1 to 2 pound ball peen hammer would work. We have various hammers for you to try and get a feel for what is comfortable. \nTypical day: Classes start at 9 but people usually show up earlier to swap stories or show off recent projects. Feel free to bring projects you are working on to show. We break for lunch. \nLunch: You can either bring a brown bag or go out to a local fast food restaurant. Classes end between 3 and 5. \nTo sign up for the three-day Beginners classes:\nSend a check made out to The Guild of Metalsmiths with contact info and email address to:\nGeorge Auel\n1865 Wellesley Ave\nSt. Paul\, MN 55105\nGeorge.Auel@gmail.com \n($180 for members\, $190 non-members) \nAcceptance will be in the order submitted\, based on the transaction date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/beginning-blacksmithing-classes-winter-2024-class-3-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240127T083000
DTEND;TZID=America/Chicago:20240127T163000
DTSTAMP:20260404T031426
CREATED:20231101T164936Z
LAST-MODIFIED:20231101T170151Z
UID:5629-1706344200-1706373000@www.metalsmith.org
SUMMARY:Leaf Tongs Class 2024
DESCRIPTION:Location:           MN School of Horseshoeing\nInstructor:s       Dave Gavin 715-821-9950 and Jesse Gavin 715-808-5891\nClass Size:         Maximum students: 8             Minimum students: 4\nClass manager:  Jesse Gavin\, jagavin6273@hotmail.com \nDescription:        This class will have you making tongs that will hold on to leaves and other thin and curved shapes without marking the surface or flattening out the veins. This class is for beginners that have gone through and have had some additional practice beyond the basics class. You will be drawing out the reins and forging the boss to shape and matching the sizes of the two.\nTools and Equipment or other items participants are to bring to the class: Favorite hammer for forging and peening rivets\, tongs to hold 1/4”x 1”\, 1/4” x 3/4”\, 1/4” and 3/8” round\, plus other tools as you see fit – i.e. grinder\, files\, etc.\nSafety Equipment: the usual for forging with coal: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch Arrangements: Local restaurants or bring your own.\nTo register for this class: send a check for $65 written to The Guild of Metalsmiths\, along with your name\, address\, phone number and email to:\nJesse Gavin\nN8214 330th street\nSpring Valley WI 54767 \nTo register online\, follow this hyperlink to our website: https://www.metalsmith.org/education/ \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/leaf-tongs-class-2024/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240210T100000
DTEND;TZID=America/Chicago:20240210T130000
DTSTAMP:20260404T031426
CREATED:20231101T165907Z
LAST-MODIFIED:20231101T170104Z
UID:5630-1707559200-1707570000@www.metalsmith.org
SUMMARY:Copper Jewelry Class 2024
DESCRIPTION:Location:            Jackson Street Roundhouse blacksmith shop (MN Transportation Museum)\, 193 Pennsylvania Ave. E.\, St. Paul\, MN  55113\nInstructor:          Larry Nevin\nCost:                   $65 members; $75 non-members\nClass size:         8 maximum (18years + )\nClass manager: Kim Maas\, 651-328-7219 \, TGoMvolunteer@gmail.com \nDescription: A Copper Jewelry Class will be held Saturday\, February 10\, 2024\, from 10:00 am to 1:00 pm at the Jackson Street Roundhouse just in time for Valentines Day. Come and make a custom piece of jewelry for your favorite Valentine or\, better yet\, for yourself. This class is a wonderful opportunity for beginner metalsmiths and a good challenge for the advanced metalsmith. The class is offered to adults only\, 18+. The maximum class size is limited to 8. so don’t wait to register. \nTo register: Mail your name\, address\, phone number and email address along with a check\nwritten to The Guild of Metalsmiths ($65 for members\, $75 for non-members) to:\nKim Maas\n965 Gorman Ave\nWest St. Paul\, MN 55118 \nTo register online\, follow this link: https://www.metalsmith.org/education/\nPlease feel free to call 651-328-7219 with questions. \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/copper-jewelry-class-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240302T090000
DTEND;TZID=America/Chicago:20240302T170000
DTSTAMP:20260404T031426
CREATED:20231201T181223Z
LAST-MODIFIED:20231201T181223Z
UID:5654-1709370000-1709398800@www.metalsmith.org
SUMMARY:Scandi style/ bushcraft knife class 2024-Day 1 of 2
DESCRIPTION:Instructor:              Paul Widenhoefer\nClass size:              8 students max \nAre you afraid of being stuck in the wilderness with only a knife at your side? Or do you just want to carve some Dala horses with a Scandinavian blade? Well\, we have the knife class for you! This class offering will be for making a scandi-style knife favored by woodworkers\, campers\, survivalists and woods men and women alike. \nWe will be covering forging a blade\, safety\, grinding\, knife steels\, handles\, heat treating\, and sharpening for this useful and versatile blade. These are typically short blades 2” to 4” in length with a wood handle. Sheathes will not be covered at this time. Students should leave with one finished (or nearly finished) knife. \nPaul Widenhoefer will be the instructor of this class. Paul has been making knives for over fifteen years and has taught knife making classes for the Guild previously. He is also a member of the ABS (American Bladesmith Society). \nWhat to bring: Students will be expected to bring safety equipment\, favorite hammer and any tongs for small stock you may have. \nLunch: Lunch can be purchased at a local establishment or brought with bag lunch style. \nTo register for this class: Send check written to Guild of Metalsmiths for $140 to: \nPaul Widenhoefer\n3618 Robin Lane\nMinnetonka\, MN 55305 \nPhone or text at 612-408-5007  Email: pwidenhoefer@gmail.com \nTo register online\, follow this link: https://www.metalsmith.org/education/. \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/scandi-style-bushcraft-knife-class-2024-day-1-of-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Paul Widenhoefer":MAILTO:pwidenhoefer@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240303T090000
DTEND;TZID=America/Chicago:20240303T170000
DTSTAMP:20260404T031426
CREATED:20231201T181441Z
LAST-MODIFIED:20231201T181441Z
UID:5655-1709456400-1709485200@www.metalsmith.org
SUMMARY:Scandi style/ bushcraft knife class 2024-Day 2 of 2
DESCRIPTION:Instructor:              Paul Widenhoefer\nClass size:              8 students max \nAre you afraid of being stuck in the wilderness with only a knife at your side? Or do you just want to carve some Dala horses with a Scandinavian blade? Well\, we have the knife class for you! This class offering will be for making a scandi-style knife favored by woodworkers\, campers\, survivalists and woods men and women alike. \nWe will be covering forging a blade\, safety\, grinding\, knife steels\, handles\, heat treating\, and sharpening for this useful and versatile blade. These are typically short blades 2” to 4” in length with a wood handle. Sheathes will not be covered at this time. Students should leave with one finished (or nearly finished) knife. \nPaul Widenhoefer will be the instructor of this class. Paul has been making knives for over fifteen years and has taught knife making classes for the Guild previously. He is also a member of the ABS (American Bladesmith Society). \nWhat to bring: Students will be expected to bring safety equipment\, favorite hammer and any tongs for small stock you may have. \nLunch: Lunch can be purchased at a local establishment or brought with bag lunch style. \nTo register for this class: Send check written to Guild of Metalsmiths for $140 to: \nPaul Widenhoefer\n3618 Robin Lane\nMinnetonka\, MN 55305 \nPhone or text at 612-408-5007  Email: pwidenhoefer@gmail.com \nTo register online\, follow this link: https://www.metalsmith.org/education/. \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/scandi-style-bushcraft-knife-class-2024-day-2-of-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Paul Widenhoefer":MAILTO:pwidenhoefer@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240309T080000
DTEND;TZID=America/Chicago:20240309T170000
DTSTAMP:20260404T031426
CREATED:20231231T215450Z
LAST-MODIFIED:20240102T180223Z
UID:5669-1709971200-1710003600@www.metalsmith.org
SUMMARY:Beginners Blacksmithing 3-day Class March 2024-Day 1 of 3
DESCRIPTION:Dates: The classes are held on the following Saturdays of March 9\, 16\, and 23\, 2024 \nLocation: Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College (see map below). \nClass Description: This 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. \nThe basic classes or proficiency is REQUIRED before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nClass Size: 8 \nCost: $190 for NON members\, $180 for Guild members (covers everything you need: the facility\, coal\, metal tools and workbook)\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nClass Champion: George Auel at George.Auel@gmail.com \nWhat you need to bring: Eye\, ear and skin protection. This includes safety glasses\, ear muff or plugs and suitable clothing which includes hard shoes\, cotton or leather. Synthetic and polyester clothing will burn and melt. There will be sparks and brushes against hot metal. \nTools: Tools are provided but if you have a favorite hammer\, punches\, chisels and tools\, bring them along. A small 1 to 2 pound ball peen hammer would work. We have various hammers for you to try and get a feel for what is comfortable. \nTypical day: Classes start at 9 but people usually show up earlier to swap stories or show off recent projects. Feel free to bring projects you are working on to show. We break for lunch. \nLunch: You can either bring a brown bag or go out to a local fast food restaurant. Classes end between 3 and 5. \n\n\n\n\n\n \n\n\n\n\n\n  \n\n\n\n\nTo register:  For non-members\,  Click [HERE] to register.\nFor Guild members\,  Click [HERE] to register in Neon under ‘Events’.\n****Acceptance will be in the order submitted\, based on the transaction date\, and each person will be notified individually.\n\n\n\n  \n\n\n\n\n\n \n\n\n\n\n\nQuestions? Email George Auel at George.Auel@gmail.com \nMap of Location:
URL:https://www.metalsmith.org/event/beginners-blacksmithing-3-day-class-january-2024-day-1-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240316T080000
DTEND;TZID=America/Chicago:20240316T170000
DTSTAMP:20260404T031426
CREATED:20240102T180416Z
LAST-MODIFIED:20240102T180416Z
UID:5674-1710576000-1710608400@www.metalsmith.org
SUMMARY:Beginners Blacksmithing Class March 2024-Day 2 of 3
DESCRIPTION:Dates: The classes are held on the following Saturdays of March 9\, 16\, and 23\, 2024 \nLocation: Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College (see map below). \nClass Description: This 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. \nThe basic classes or proficiency is REQUIRED before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nClass Size: 8 \nCost: $190 for NON members\, $180 for Guild members (covers everything you need: the facility\, coal\, metal tools and workbook)\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nClass Champion: George Auel at George.Auel@gmail.com \nWhat you need to bring: Eye\, ear and skin protection. This includes safety glasses\, ear muff or plugs and suitable clothing which includes hard shoes\, cotton or leather. Synthetic and polyester clothing will burn and melt. There will be sparks and brushes against hot metal. \nTools: Tools are provided but if you have a favorite hammer\, punches\, chisels and tools\, bring them along. A small 1 to 2 pound ball peen hammer would work. We have various hammers for you to try and get a feel for what is comfortable. \nTypical day: Classes start at 9 but people usually show up earlier to swap stories or show off recent projects. Feel free to bring projects you are working on to show. We break for lunch. \nLunch: You can either bring a brown bag or go out to a local fast food restaurant. Classes end between 3 and 5. \n\n\n\n\n\n \n\n\n\n\n\n  \n\n\n\n\nTo register:  For non-members\,  Click [HERE] to register.\nFor Guild members\,  Click [HERE] to register in Neon under ‘Events’.\n****Acceptance will be in the order submitted\, based on the transaction date\, and each person will be notified individually.\n\n\n\n  \n\n\n\n\n\n \n\n\n\n\n\nQuestions? Email George Auel at George.Auel@gmail.com \nMap of Location:
URL:https://www.metalsmith.org/event/beginners-blacksmithing-class-march-2024-day-2-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240323T080000
DTEND;TZID=America/Chicago:20240323T170000
DTSTAMP:20260404T031426
CREATED:20240102T180533Z
LAST-MODIFIED:20240102T180533Z
UID:5675-1711180800-1711213200@www.metalsmith.org
SUMMARY:Beginners Blacksmithing Class March 2024 - Day 3 of 3
DESCRIPTION:Dates: The classes are held on the following Saturdays of March 9\, 16\, and 23\, 2024 \nLocation: Minnesota School of Horseshoeing\, 6250 Riverdale Dr NW\, Ramsey MN 55303\, just off Hwy 10 near the Anoka Vocational College (see map below). \nClass Description: This 3 day class covers the basics of: Safety\, Tools\, Fire Control\, Forging Dynamics\, Tapers (ribbon\, fishtail\, point)\, Twisting\, Riveting\, Shouldering\, Upset\, Cutting\, Splitting\, Punching\, Heat Treat\, Scrolling\, Bending\, Forge weld.\nThe beginners basic classes are designed to give everyone the same understanding of the basics\, techniques and terminology. \nThe basic classes or proficiency is REQUIRED before taking any of the many other classes the Guild offers. This enables those classes to concentrate on advanced techniques without having to spend time on basic concepts. \nClass Size: 8 \nCost: $190 for NON members\, $180 for Guild members (covers everything you need: the facility\, coal\, metal tools and workbook)\nMinors (under 18) must have a parent present. There will be no sharing of forges. \nClass Champion: George Auel at George.Auel@gmail.com \nWhat you need to bring: Eye\, ear and skin protection. This includes safety glasses\, ear muff or plugs and suitable clothing which includes hard shoes\, cotton or leather. Synthetic and polyester clothing will burn and melt. There will be sparks and brushes against hot metal. \nTools: Tools are provided but if you have a favorite hammer\, punches\, chisels and tools\, bring them along. A small 1 to 2 pound ball peen hammer would work. We have various hammers for you to try and get a feel for what is comfortable. \nTypical day: Classes start at 9 but people usually show up earlier to swap stories or show off recent projects. Feel free to bring projects you are working on to show. We break for lunch. \nLunch: You can either bring a brown bag or go out to a local fast food restaurant. Classes end between 3 and 5. \n\n\n\n\n\n \n\n\n\n\n\n  \n\n\n\n\nTo register:  For non-members\,  Click [HERE] to register.\nFor Guild members\,  Click [HERE] to register in Neon under ‘Events’.\n****Acceptance will be in the order submitted\, based on the transaction date\, and each person will be notified individually.\n\n\n\n  \n\n\n\n\n\n \n\n\n\n\n\nQuestions? Email George Auel at George.Auel@gmail.com \nMap of Location:
URL:https://www.metalsmith.org/event/beginners-blacksmithing-class-march-2024-day-3-of-3/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="George Auel":MAILTO:george.auel@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240413T083000
DTEND;TZID=America/Chicago:20240413T163000
DTSTAMP:20260404T031426
CREATED:20240227T191818Z
LAST-MODIFIED:20240301T171131Z
UID:5706-1712997000-1713025800@www.metalsmith.org
SUMMARY:Candle Chandelier Class 2024
DESCRIPTION:Instructor: Don Hogenson\nClass size:   Max 8\, min 4 students \nClass Description In this class you will be forging\, twisting\, and riveting together a candle chandelier. You’ll be working with round\, flat\, and short sections of pipe.  Students should have completed the basics classes. Side note: Don learned how to make this in a class given by Dave Marriette – far enough in the past that we couldn’t come up with what year it was. \nClass Champion: Jesse Gavin 1-715-808-5891 jagavin6273@hotmail.com \nTools and Equipment or other items participants are to bring to the class: Favorite hammer for forging and peening rivets\, tongs to hold 1/4” and 3/8” round\, thin flat stock and pipe\, plus other tools as you see fit – i.e. wire brush\, touch mark\, etc. \nSafety Equipment: the usual for forging with coal: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes. \nLunch arrangements: bring a bag lunch or visit one of the nearby establishments. \nTo register for the class online\, follow this link: \nhttps://www.metalsmith.org/education/ \nTo register with a check:   Send a check written to The Guild of Metalsmiths for $65\, including your contact info\, to:\nJesse Gavin\nN8214 330 St\nSpring Valley WI 54767 \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/candle-chandelier-class-2024/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240413T090000
DTEND;TZID=America/Chicago:20240413T153000
DTSTAMP:20260404T031426
CREATED:20240227T193155Z
LAST-MODIFIED:20240301T171101Z
UID:5708-1712998800-1713022200@www.metalsmith.org
SUMMARY:'Taste of Blacksmithing' 2024
DESCRIPTION:Instructor: Rebecca Hrobak \nClass size: Max 4\, min 4\nChampion: Kim Maas\, 651-328-7219\, TGoMvolunteer@gmail.com \nDescription:  This is the day to try blacksmithing. All are welcome. We have designed this for the complete novice. Hammer in hand\, iron heated in the coal forge\, anvil at the ready\, you’ll be making one or more of these take-home projects shown at right: a drive-hook\, an S-hook\, a wrist cuff (Viking armband\, anyone?)\, or just keep hammering and see what amazing shape comes forth. Bring:  your creativity\, safety glasses\, and curiosity. We supply everything else.\nSafety Equipment: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, cotton or leather gloves and leather boots or shoes.\nLunch Arrangements: Bring lunch\, snacks\, and water or your favorite beverage. There is no formal shut down to break for lunch. You can stop any time during the class for snacks\, lunch\, or to rest. \nTo register for the class online\, follow the link below: \nhttps://www.metalsmith.org/education/ \nTo register with a check:  Send a check for $65 written to: The Guild of Metalsmiths and mail check along with your contact information (phone number & email address) to:\nKim Maas\n965 Gorman Ave.\nWest St. Paul\, MN  55118 \n Acceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/taste-of-blacksmithing-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240420T090000
DTEND;TZID=America/Chicago:20240420T170000
DTSTAMP:20260404T031426
CREATED:20240201T155052Z
LAST-MODIFIED:20240201T155500Z
UID:5690-1713603600-1713632400@www.metalsmith.org
SUMMARY:Wire Inlay Class 2024
DESCRIPTION:Instructor:        Martin Pansch\, 612-599-4762     blacksmithingyeti@gmail.com\nCost:                  $55.00\,  $65.00 for non-Guild members\nClass size:         Maximum 8\, minimum 4 students\nClass Description:\nThe class will focus on wire inlay into mild steel. This is a technique that can be used to add decorative elements to many of your projects.  Students will chase grooves in the metal and then chase the bottoms of the grooves square. The two corners thus created will be chased to form an undercut channel. The upper edges of the channels will be chased and filed to create grooves of even width. Copper wire will be planished into the grooves so that the softer metal forms to fit the undercut and it locked in place. Surfaces will then be filed smooth leaving a pattern to  This class will concentrate on the basics of the straight lines\, curved lines\, and dots. We’ll cover both wire that is filed flush with the surface of the steel and left as a raised bead. \nTools and Equipment or other items participants are to bring to the class. \nStudents will need a light\, soft face hammer for striking tools. This hammer should be light enough that thousands of blows will not be tiring. A cheap Chinese ball peen will likely need no softening. Additional tools include: A mill file\, a hack saw\, sand paper\, sharpening stones (a diamond lap plate works well)\, paper\, pencil\, Sharpie ™. Students may consider bringing a supplemental light source or other visual enhancement aids as needed. Bring a stool if you prefer to work sitting. \nA basic set of small chisels will be provided for students for use in the class. Those over-achievers who want to make their own prior to class can request detailed descriptions of the needed tools. \nSafety Equipment – safety glasses & ear plugs are mandatory. \nLunch arrangements: Either bring a bag lunch with you or money to dine at some of the establishments in the area. \nClass manager is Gordon Barr. For questions\, contact Gordon at agbarr@aol.com   952-894-4821 \nTo register online:  click here to our website Education page \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually \n 
URL:https://www.metalsmith.org/event/wire-inlay-class-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240427T083000
DTEND;TZID=America/Chicago:20240427T160000
DTSTAMP:20260404T031426
CREATED:20240201T160204Z
LAST-MODIFIED:20240201T160251Z
UID:5692-1714206600-1714233600@www.metalsmith.org
SUMMARY:Joinery One\, 2-Day Class 2024\, Day 1 of 2
DESCRIPTION:Instructors:        Derrick Phillips and others\nClass size:         Maximum students:  8             Minimum students:  4\nClass Description:\nThis is Part One of Three in a Joinery class series. The overall courses are skills based\, to incorporate all that was learned in a class taken by the instructors and taught by Mark Aspery. In this first 12 hours of instruction the student will learn the importance of proper tool making to accomplish successful joinery. We will concentrate this portion on forging tooling to perform ½” slot punching and drifting with ½” round and square drifts. The class is open to all students that have taken the beginners class.  Understand that if the student has not had a year or so of reasonably consistent practice\, this class will be extra challenging. \nTools and Equipment or other items participants are to bring to the class:\nPersonal Protective Equipment (PPE)\, hammers (rounding & flat face/peen)\, tongs to firmly hold (inline and perpendicular) ½” round\, and square\, and ¾” round\, files (hot rasp & 12″ bastard)\, center punch\, hot cut chisel\, measuring device (non-flammable)\, worn or broken grinding wheel or a sharpening stone (for polishing for heat treating). \nSafety Equipment:  The usual for forging with coal: safety glasses\, hearing protection\, respirator or dust mask for grinding\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes. \nLunch Arrangements: Bring your own lunch or eat at one of the local establishments. We will take an hour break around noon. \nTo register for this class:  send a check written to -The Guild of Metalsmiths for $160 to:\nDerrick Phillips\n2461 Como Ave\nSt. Paul MN 55108 \nTo register online:  click here to our website Education page \nContact Derrick with questions.  derrickphillipsa3o3@gmail.com. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/joinery-one-class-2024-day-1-of-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240428T083000
DTEND;TZID=America/Chicago:20240428T160000
DTSTAMP:20260404T031426
CREATED:20240201T160648Z
LAST-MODIFIED:20240201T161120Z
UID:5693-1714293000-1714320000@www.metalsmith.org
SUMMARY:Joinery One 2024 2-Day Class-Day 2 of 2
DESCRIPTION:Instructors:      Derrick Phillips and others\nClass size:         Maximum students:  8             Minimum students:  4\nClass Description:\nThis is Part One of Three in a Joinery class series. The overall courses are skills based\, to incorporate all that was learned in a class taken by the instructors and taught by Mark Aspery. In this first 12 hours of instruction the student will learn the importance of proper tool making to accomplish successful joinery. We will concentrate this portion on forging tooling to perform ½” slot punching and drifting with ½” round and square drifts. The class is open to all students that have taken the beginners class.  Understand that if the student has not had a year or so of reasonably consistent practice\, this class will be extra challenging. \nTools and Equipment or other items participants are to bring to the class:\nPersonal Protective Equipment (PPE)\, hammers (rounding & flat face/peen)\, tongs to firmly hold (inline and perpendicular) ½” round\, and square\, and ¾” round\, files (hot rasp & 12″ bastard)\, center punch\, hot cut chisel\, measuring device (non-flammable)\, worn or broken grinding wheel or a sharpening stone (for polishing for heat treating). \nSafety Equipment:  The usual for forging with coal: safety glasses\, hearing protection\, respirator or dust mask for grinding\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes. \nLunch Arrangements: Bring your own lunch or eat at one of the local establishments. We will take an hour break around noon. \nTo register for this class:  send a check written to -The Guild of Metalsmiths for $160 to:\nDerrick Phillips\n2461 Como Ave\nSt. Paul MN 55108 \nTo register online:  click here to our website Education page \nContact Derrick with questions.  derrickphillipsa3o3@gmail.com. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/joinery-one-2024-2-day-class-day-2-of-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Derrick Phillips":MAILTO:derrick_phillips@q.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240504T090000
DTEND;TZID=America/Chicago:20240504T170000
DTSTAMP:20260404T031426
CREATED:20240227T195001Z
LAST-MODIFIED:20240301T170953Z
UID:5710-1714813200-1714842000@www.metalsmith.org
SUMMARY:Hammer Class 2024
DESCRIPTION:Hammer with anvil \nInstructor: Derrick Phillips and others\nClass size: Max 8\, min 4\nDescription: It is recommended that anyone wishing to take this class have taken at least a few days long beginners class\, and have several weeks of forging time. This will help ensure a certain comfort at the forge and with hot metal\, as this class works with a larger hot piece. This class will teach you the skills you need to make a basic rounding hammer. With this knowledge you will then be able to expand your tool chest with other handled tools. All handled tools such as top fullers\, punches and flatters start with this same process. We will begin with a piece of tool steel\, punch the eye\, shape both striking ends\, heat treat and add the handle. You will go home with your own hammer. There will be an assortment of weights to choose from so you can make a hammer to fit your size and needs. This is an intermediate skill level class. \nTools and other items to bring: Bring your favorite hammers: one for striking hot metal and one for striking punches and drifts. A tongs for holding 1-1/2″ square stock if you have that size.\nSafety equipment to bring: the usual for forging with coal: safety glasses\, hearing protection\, respirator or dust mask for grinding\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nTools and other items to bring: Bring your favorite hammers: one for striking hot metal and one for striking punches and drifts. A tongs for holding 1-1/2″ square stock if you have that size.\nSafety equipment to bring: the usual for forging with coal: safety glasses\, hearing protection\, respirator or dust mask for grinding\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch arrangements: Bring your own lunch or eat at one of the local establishments. We will take an hour break around noon. \nTo register for this class with a check:  Send a check written to -The Guild of Metalsmiths for $75 to:\nDerrick Phillips\n2461 Como Ave\nSt. Paul MN 55108\nContact Derrick with questions.  derrickphillipsa3o3@gmail.com.\nTo register online:  click here to our website Education page \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/hammer-class-2024/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Derrick Phillips":MAILTO:derrick_phillips@q.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240511T083000
DTEND;TZID=America/Chicago:20240511T160000
DTSTAMP:20260404T031426
CREATED:20240227T200314Z
LAST-MODIFIED:20240301T182824Z
UID:5711-1715416200-1715443200@www.metalsmith.org
SUMMARY:Intro to Arc Welding 2024
DESCRIPTION:Instructor: Ben Groves\nClass size: Max 4\, Min 4\nDescription: \nIf you’ve ever wanted to know more about welding\, but didn’t have a way to do it\, here’s your chance. There’s something mysterious and magical about welding. Welders sit so close to this fountain of sparks that most people would jump back from. This one-day class will be a survey of three common modern arc welding techniques which are appropriate for hobby welding: \n\nShielded Metal Arc Welding (SMAW/Stick)\nGas Metal Arc Welding (GMAW/MIG)\nFlux Cored Arc Welding (FCAW)\n\nEach technique will be explained and demonstrated. Then the student will have hands-on time to practice. \nSafety Equipment – Wear clothing made of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nOther Equipment: Proper welding gloves\, welding leathers or coat\, welding helmet.\nLunch Arrangements: Bring a bag lunch or eat at a local restaurant.\nTo register for this class with a check:  Send a check for $100 written to -The Guild of Metalsmiths to:\nMartin Masters\n395 Bucher Ave.\nShoreview\, MN 55126\nTo register online:  click here to our website Education page\nContact Marty with questions.  mastersmw@yahoo.com  or 651-285-8731 \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.\n \nJackson Street Roundhouse \n  \n  \n 
URL:https://www.metalsmith.org/event/intro-to-arc-welding-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240919T080000
DTEND;TZID=America/Chicago:20240920T140000
DTSTAMP:20260404T031426
CREATED:20240701T180931Z
LAST-MODIFIED:20240818T033230Z
UID:5800-1726732800-1726840800@www.metalsmith.org
SUMMARY:2024 Pre-Conference 2-Day Class: Latch Hook & Fire Poker is full
DESCRIPTION:Latch Hook \nFire Poker \nClass limit: Max 12 Cost: $225 members; $265 non-members. \nClass Description: This year’s pre-conference class attendees will be working on items from the Level I and Level II national curriculum. They will be making a latch and hook and a fire poker. Mark will be working with students to progress through the Level I and Level II skills required to create each piece. The class will generally follow the ABANA National Curriculum as the syllabus. Check out the ABANA website under education for more information on the Level I and Level II curriculum.  National Curriculum for Blacksmiths & Instructors – ABANA (www.abana.org/education/national-curriculm) \n  \nTools & equipment students should bring to class: Anvil and forge\, tongs for ¾” x ¼” bar stock\, tongs for ¼” round\, tongs for ¾” round\,  cross peen hammer and wire brush. Additional tools may be added to the list later.  \nSafety: Ear protection and goggles. \nLunch: bring a lunch or dine at one of the local establishments in Ellsworth. \nTo register for this class online: https://www.metalsmith.org/education/pre-conference-class/ \nTo register for this class by check: Send a check written to The Guild of Metalsmiths and your contact info to: Rick Wessling\, 3442 Washington Ave N\, Minneapolis\, MN 55412. Please include your email address so I may notify you of acceptance to the class. \nQuestions? Email rgwessling@gmail.com \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \nMap to Pierce County Fairgrounds\, Ellsworth WI
URL:https://www.metalsmith.org/event/2024-pre-conference-2-day-class-latch-hook-fire-poker-is-full/
LOCATION:Pierce Country Fairgrounds\, Ellsworth\, WI\, 55033\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Rick Wessling":MAILTO:rgwessling@gmail.com
GEO:44.63343;-92.835444
END:VEVENT
END:VCALENDAR