BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//The Guild of Metalsmiths - ECPv6.15.15//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.metalsmith.org
X-WR-CALDESC:Events for The Guild of Metalsmiths
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240830T090000
DTEND;TZID=America/Chicago:20240901T170000
DTSTAMP:20260416T212348
CREATED:20240326T185806Z
LAST-MODIFIED:20240326T185806Z
UID:5764-1725008400-1725210000@www.metalsmith.org
SUMMARY:Volunteer Op: Rice County Steam and Gas Engine Show 2024
DESCRIPTION:Contact Martin Pansch to volunteer for this event:  blacksmithingyeti@gmail.com  612-599-4762 \nBring your hand tools and a project.
URL:https://www.metalsmith.org/event/volunteer-op-rice-county-steam-and-gas-engine-show-2024/
LOCATION:Rice County Steam & Gas Engine Show grounds\, Highway 3\, Dundas\, MN\, 55019\, United States
CATEGORIES:Activity,Upcoming
ORGANIZER;CN="Martin Pansch":MAILTO:blacksmithingyeti@gmail.com
GEO:44.4031876;-93.2171554
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Rice County Steam & Gas Engine Show grounds Highway 3 Dundas MN 55019 United States;X-APPLE-RADIUS=500;X-TITLE=Highway 3:geo:-93.2171554,44.4031876
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240906T090000
DTEND;TZID=America/Chicago:20240908T170000
DTSTAMP:20260416T212348
CREATED:20240326T190335Z
LAST-MODIFIED:20240326T190335Z
UID:5765-1725613200-1725814800@www.metalsmith.org
SUMMARY:Volunteer Op: Lamberton Hot Iron Days 2024
DESCRIPTION:Contact Bob Brown to volunteer for this event: bbrown474@msn.com\, 651-260-2749 \nFriday: mold making Noon–7pm. Strike Iron pour Friday night. \nSaturday: mold making 9 or 10\, 6 or 7pm. Iron pour after sunset. Times may vary slightly
URL:https://www.metalsmith.org/event/volunteer-op-lamberton-hot-iron-days-2024/
LOCATION:Lamberton Hot Iron Days\, lamberton\, MN\, 56152\, United States
CATEGORIES:Activity,Upcoming
ORGANIZER;CN="Bob Brown":MAILTO:bbrown474@msn.com
GEO:44.2310676;-95.2641639
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240914T090000
DTEND;TZID=America/Chicago:20240915T170000
DTSTAMP:20260416T212348
CREATED:20240326T190547Z
LAST-MODIFIED:20240326T190547Z
UID:5766-1726304400-1726419600@www.metalsmith.org
SUMMARY:Volunteer Op: Laura Ingalls Wilder Days 2024
DESCRIPTION:Contacty Tom Latané\, tclatane@gmail.com\,  715-442-2419 \nCome watch Tom Latané demo. Since Pete Stanaitis has retired\, additional demonstrator space is available for someone willing to set up and demonstrate forge work in late 19th century fashion. Other period craft demonstrations are welcome. Call/email Tom or Kitty for details.
URL:https://www.metalsmith.org/event/volunteer-op-laura-ingalls-wilder-days-2024/
LOCATION:Laura Ingalls Wilder Days\, Pepin\, WI\, United States
CATEGORIES:Activity,Upcoming
ORGANIZER;CN="Tom Latane'":MAILTO:tlatane@centurltel.net
GEO:44.4410785;-92.14795
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240919T080000
DTEND;TZID=America/Chicago:20240920T140000
DTSTAMP:20260416T212348
CREATED:20240701T180931Z
LAST-MODIFIED:20240818T033230Z
UID:5800-1726732800-1726840800@www.metalsmith.org
SUMMARY:2024 Pre-Conference 2-Day Class: Latch Hook & Fire Poker is full
DESCRIPTION:Latch Hook \nFire Poker \nClass limit: Max 12 Cost: $225 members; $265 non-members. \nClass Description: This year’s pre-conference class attendees will be working on items from the Level I and Level II national curriculum. They will be making a latch and hook and a fire poker. Mark will be working with students to progress through the Level I and Level II skills required to create each piece. The class will generally follow the ABANA National Curriculum as the syllabus. Check out the ABANA website under education for more information on the Level I and Level II curriculum.  National Curriculum for Blacksmiths & Instructors – ABANA (www.abana.org/education/national-curriculm) \n  \nTools & equipment students should bring to class: Anvil and forge\, tongs for ¾” x ¼” bar stock\, tongs for ¼” round\, tongs for ¾” round\,  cross peen hammer and wire brush. Additional tools may be added to the list later.  \nSafety: Ear protection and goggles. \nLunch: bring a lunch or dine at one of the local establishments in Ellsworth. \nTo register for this class online: https://www.metalsmith.org/education/pre-conference-class/ \nTo register for this class by check: Send a check written to The Guild of Metalsmiths and your contact info to: Rick Wessling\, 3442 Washington Ave N\, Minneapolis\, MN 55412. Please include your email address so I may notify you of acceptance to the class. \nQuestions? Email rgwessling@gmail.com \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually. \nMap to Pierce County Fairgrounds\, Ellsworth WI
URL:https://www.metalsmith.org/event/2024-pre-conference-2-day-class-latch-hook-fire-poker-is-full/
LOCATION:Pierce Country Fairgrounds\, Ellsworth\, WI\, 55033\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Rick Wessling":MAILTO:rgwessling@gmail.com
GEO:44.63343;-92.835444
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240920T080000
DTEND;TZID=America/Chicago:20240922T170000
DTSTAMP:20260416T212348
CREATED:20240701T174847Z
LAST-MODIFIED:20240701T175902Z
UID:5797-1726819200-1727024400@www.metalsmith.org
SUMMARY:47th Annual TGoM Fall Conference 2024
DESCRIPTION:TGoM’s 47th Annual Fall Conference September 20\, 21\, 22\, 2024\nFeaturing Blacksmithing Demonstrations by Mark Aspery from Springville\, CA and Peter Braspenninx from Grand Rapids\, MI \nIncluding pre-conference class with Mark Aspery\, gallery\, live\nauction\, tailgating\, onsite camping\, great food\, and events for the entire family!\nSubmit your best “Bottle Opener or Picture Frame” to the live auction for the chance to win cash prizes!\nFree attendance for members and non-members on Saturday after 5 pm for viewing of the gallery & participation in the live auction.  \nLocation: \nThe Pierce County Fairgrounds\n364 N. Maple St.\nEllsworth\, WI (Map below)
URL:https://www.metalsmith.org/event/47th-annual-tgom-fall-conference-2024/
LOCATION:Pierce Country Fairgrounds\, Ellsworth\, WI\, 55033\, United States
CATEGORIES:Activity,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.63343;-92.835444
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240921T110000
DTEND;TZID=America/Chicago:20240921T150000
DTSTAMP:20260416T212348
CREATED:20240326T151926Z
LAST-MODIFIED:20240327T184048Z
UID:5736-1726916400-1726930800@www.metalsmith.org
SUMMARY:Volunteer Op: Fall Festival\, Holz Farm\, Eagan MN
DESCRIPTION:Harvest Festival– Saturday\, September 21\, 2024 | $3/person  |  11:00 a.m. – 3:00 p.m. \nThe Friends of the Farm and Eagan Parks & Recreation invite you to join them for a day of fall fun. Visit Historic Holz Farm and enjoy hayrides\, live music\, animals and live demonstrations. A special fiddling  contest will take place at 1:00 p.m. Did you know that Historic Holz Farm is on the National Registry of Historic Places? This 1940’s era farm brings you back to yesteryear and what farming was like back in Eagan’s early days. Tickets are required for all individuals 12 months and older and are available at discovereagan.com or onsite.  \nNote from Zach Christiansen\, the champion:\nThe event is pretty relaxed. Show up a bit early\, clear out the shed so there is room to work (stumps\, fire pits\, some cobbler items) then I setup my forge and anvil so I’m ready for the day. After that it’s just making things\, talking to visitors/answering questions\, and I give away the items I make. Mostly I make hooks or duplex nail swords\, but any small quick to make item has been good for me. I’m sure someone could do larger items\, knives\, etc too. I also have a table setup to show other items I have made in classes. It gives another talking point. And of course keeping an eye out for those folks who are extra curious and making sure they get a brochure.
URL:https://www.metalsmith.org/event/volunteer-op-fall-festival-holz-farm-eagan-mn/
LOCATION:Holtz Farm\, Eagan\, MN\, 55123
CATEGORIES:Activity,Upcoming
ORGANIZER;CN="Zach Christianson":MAILTO:ziggmo@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240928T090000
DTEND;TZID=America/Chicago:20240928T160000
DTSTAMP:20260416T212348
CREATED:20240801T191432Z
LAST-MODIFIED:20240801T193748Z
UID:5809-1727514000-1727539200@www.metalsmith.org
SUMMARY:Engraving Class 2024
DESCRIPTION:Instructor:              William Breczinski  brecwill@gmail.com  \nDescription:       This is a class on how to add decorations to your metal project. Engraving is a time-honored art form that can be as simple as a few scratches to as intricate as a fowling piece fit for royalty.  Personally\, I’ve wanted to add this skill to my collection for a long time\, which is why I’ve organized this class. William Breczinski was the recipient of an educational grant from the Guild\, and this is his first opportunity to share the knowledge that he gained. The class requires no previous experience.  \nClass Manager: Martin Masters  mastersmw@yahoo.com 651-285-8731 \nTools and Equipment or other items participants are to bring to the class: small hammer \nSafety Equipment – Eye and ear protection \nLunch Arrangements: Bring your own food. There are restaurants in the area. \nTo register online:  click here to our website Education page \nTo register for this class with a check: Send a check for $75 written to The Guild of Metalsmiths to: \nMartin Masters\n395 Bucher Ave.\nShoreview\, MN 55126 \nContact Marty with questions. mastersmw@yahoo.com or 651-285-8731 \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \nJackson Street Roundhouse \n 
URL:https://www.metalsmith.org/event/engraving-class-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241005T090000
DTEND;TZID=America/Chicago:20241005T163000
DTSTAMP:20260416T212348
CREATED:20240805T222932Z
LAST-MODIFIED:20240818T033025Z
UID:5818-1728118800-1728145800@www.metalsmith.org
SUMMARY:Oxy/Acetylene Welding 2-Day Class 2024--Day 1 of 2-is full
DESCRIPTION:Location: Myron Hanson’s East Eagan Blacksmith Shop\, 4015 Dodd Road\, East Eagan\, MN\nInstructors: Myron Hanson\, Bob Brown\, and Dick Carlson\n$175 Guild-member; $195 non-member\nMaximum students: 8\, minimum: 4 \n New to gas welding? Just want to brush up your basic skills? This class focuses on safety and hands-on learning. Students will be working at individual stations on a shared workbench\, with equipment and stock provided. If time permits\, bonus demonstrations will show advanced techniques and uses of the oxyacetylene torch. \nStudents should be prepared for sparks and melted/hot metal: common safety garb (leather footwear and clothing made of cotton\, leather\, or wool –no synthetics\, no cuffs\, or frayed edges) plus eye protection with a #5 lens\, either in a face shield (preferred)\, goggles or glasses. If you wear corrective lenses\, bring those\, too. Cloth cap is optional\, gloves are recommended. \nLunch Arrangements: Pack a lunch\, or there are convenience stores/fast food joints in the area. \nTo register:\nOn-line: Guild Website https://www.metalsmith.org/education \nOr send a check written to “The Guild of Metalsmiths” and mail\, along with your contact information (name of student\, address\, phone number and email address) to:\nKim Maas\n965 Gorman Ave.\nWest St. Paul\, MN 55118 \nAcceptance will be in the order sent\, based on the postmark\, and each person will be notified individually. \nQuestions? Email  TGoM.volunteer@gmail.com \nMyron Hanson’s shop
URL:https://www.metalsmith.org/event/oxy-acetylene-welding-2-day-class-2024-is-full/
LOCATION:Myron Hanson’s Shop\, 4015 Dodd Rd\, Eagan\, MN\, 55123-1612\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.811273;-93.115724
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Myron Hanson’s Shop 4015 Dodd Rd Eagan MN 55123-1612 United States;X-APPLE-RADIUS=500;X-TITLE=4015 Dodd Rd:geo:-93.115724,44.811273
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241006T080000
DTEND;TZID=America/Chicago:20241006T163000
DTSTAMP:20260416T212348
CREATED:20240805T223844Z
LAST-MODIFIED:20240818T032927Z
UID:5820-1728201600-1728232200@www.metalsmith.org
SUMMARY:Oxy/Acetylene Welding 2-Day Class 2024–Day 2 of 2-is full
DESCRIPTION:Location: Myron Hanson’s East Eagan Blacksmith Shop\, 4015 Dodd Road\, East Eagan\, MN\nInstructors: Myron Hanson\, Bob Brown\, and Dick Carlson\nCost: $175 guild member\, $195 non-member\nMaximum students: 8\, minimum: 4 \n  \nNew to gas welding? Just want to brush up your basic skills? This class focuses on safety and hands-on learning. Students will be working at individual stations on a shared workbench\, with equipment and stock provided. If time permits\, bonus demonstrations will show advanced techniques and uses of the oxyacetylene torch. \nStudents should be prepared for sparks and melted/hot metal: common safety garb (leather footwear and clothing made of cotton\, leather\, or wool –no synthetics\, no cuffs\, or frayed edges) plus eye protection with a #5 lens\, either in a face shield (preferred)\, goggles or glasses. If you wear corrective lenses\, bring those\, too. Cloth cap is optional\, gloves are recommended. \nLunch Arrangements: Pack a lunch\, or there are convenience stores/fast food joints in the area. \nTo register:\nOn-line: Guild Website https://www.metalsmith.org/education\n Or send a check written to “The Guild of Metalsmiths” and mail\, along with your contact information (name of student\, address\, phone number and email address) to:\n Kim Maas\n965 Gorman Ave.\nWest St. Paul\, MN 55118 \nAcceptance will be in the order sent\, based on the postmark\, and each person will be notified individually.\nQuestions? Email  TGoMvolunteer@gmail.com
URL:https://www.metalsmith.org/event/oxy-acetylene-welding-2-day-class-2024-day-2-of-2-is-full/
LOCATION:Myron Hanson’s Shop\, 4015 Dodd Rd\, Eagan\, MN\, 55123-1612\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.811273;-93.115724
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Myron Hanson’s Shop 4015 Dodd Rd Eagan MN 55123-1612 United States;X-APPLE-RADIUS=500;X-TITLE=4015 Dodd Rd:geo:-93.115724,44.811273
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241009T183000
DTEND;TZID=America/Chicago:20241009T210000
DTSTAMP:20260416T212348
CREATED:20241001T172744Z
LAST-MODIFIED:20241001T172744Z
UID:5853-1728498600-1728507600@www.metalsmith.org
SUMMARY:TGoM Membership Meeting October 2024
DESCRIPTION:October 9 Membership Meeting Explores AI Advances in Materials Discovery\nEllad Tadmor is a Professor of Aerospace Engineering and Mechanics at U of M\, and he will lead our program on Wednesday\, October 9\, at Christ the King Lutheran church (8600 Freemont Ave S in Bloomington. Map unavailable. Check Google). He will talk about how recent advances in artificial intelligence (AI) are revolutionizing materials discovery. He spoke to us years ago at the Historic Fort Snelling Auditorium with a combined meeting with the MN Clockmakers Guild. \nProf. Tadmor uses theoretical models and computer simulations to understand material behavior and failure from the fundamental interactions of their atoms. This requires a multiscale approach that can link processes occurring on atomic scales to the scales of human perception. \nI looked at his fall class load\, and he is teaching a graduate level course on Continuum Mechanics\, which is the fundamental subject that serves as the foundation for solid and fluid mechanics. It provides the most general description of the deformation and response of materials to external loading. He says that this is his favorite class to teach because it shows students how most everything they learned in their undergraduate engineering curriculum is unified and generalized in this course. \nNote: If you’re over 62\, you can take the course for the price of books and parking. It’s course # is AEM5501. Don’t know about you\, but I don’t think I would be his best student \nWe will enjoy our customary potluck at 6:30 pm\, so be sure to bring a dish to pass and some of your favorite show-n-tell items. \n— Richard Zielike \n 
URL:https://www.metalsmith.org/event/tgom-membership-meeting-october-2024/
LOCATION:Christ the King Lutheran Church\, 8600 Freemont Ave S.\, Bloomington\, MN\, United States
CATEGORIES:Meeting,Upcoming
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241019T080000
DTEND;TZID=America/Chicago:20241019T170000
DTSTAMP:20260416T212348
CREATED:20240801T192353Z
LAST-MODIFIED:20240924T172545Z
UID:5810-1729324800-1729357200@www.metalsmith.org
SUMMARY:Betty Lamp Class 2024
DESCRIPTION:Instructor:             Martin Pansch\, 612-599-4762  blacksmithingyeti@gmail.com\nClass size:              Maximum 8 students; minimum students 4 \nBetty Lamp \nClass Description: A Betty lamp is an 18th century oil lamp of Germanic origin that could use any number of household oils (fish oil\, fat trimmings\, bacon grease\, etc.) In this class we will be making Betty lamps by cutting\, filing\, and bending pieces from thin sheet metal. Pieces will be held together by small rivets while we braze the bottom in the coal forge to make it water (oil) tight. The top will include a light hinge. The forging in this class is minimal and light\, making rivets and the spine. Some students may not finish the lamp during class time. \nClass Manager:  Marty Masters  Contact Marty with questions: mastersmw@yahoo.com or 651-285-8731 \nTools and Equipment or other items participants are to bring to the class: A forging hammer\, a small (8 oz or so) cross peen\, a medium size flat mill file\, small/jewelers square files\, a hacksaw with fine blade (18 or 24 TPI)\, small cold chisel\, vernier calipers\, long flux spoon\, borax flux\, tongs for 1/8”\, center punch\, scribe\, fine Sharpie. For making small rounds and square holes (1/8” or so) you can either bring a drill and bits or small punches. If you have a vise with good jaws that you can bring that would be helpful. \nSafety Equipment – safety glasses\, ear plugs\, natural fiber clothing (nothing that will melt). \nLunch Arrangements: You can either bring lunch or grab something from one of the local dining establishments. \nTo register online:  click here to our website Education page \nTo register for this class with a check: Contact class manager Marty Masters at mastersmw@yahoo.com or 651-285-8731 and send him a a check for $75 written to The Guild of Metalsmiths. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/betty-lamp-class-2024/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241102T083000
DTEND;TZID=America/Chicago:20241102T163000
DTSTAMP:20260416T212348
CREATED:20241001T170549Z
LAST-MODIFIED:20241001T170549Z
UID:5849-1730536200-1730565000@www.metalsmith.org
SUMMARY:Candle Chandelier Class 2024
DESCRIPTION:Instructor:          Don Hogenson\nClass Manager: Jesse Gavin\nClass size: maximum 8; minimum 4 \nClass Description: In this class you will be forging\, twisting\, and riveting together a candle chandelier. You’ll be working with round\, flat\, and short sections of pipe.  Students should have completed the basics classes. Side note: Don learned how to make this in a class given by Dave Mariette – far enough in the past that we couldn’t come up with the year!\nTools and Equipment or other items participants are to bring to the class: Favorite hammer for forging and peening rivets\, tongs to hold 1/4” and 3/8” round\, thin flat stock and pipe\, plus other tools as you see fit – i.e. wire brush\, touch mark\, etc.\nSafety Equipment: the usual for forging with coal: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch Arrangements: local restaurants or bring your own. \n 
URL:https://www.metalsmith.org/event/candle-chandelier-class-2024-2/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241116T090000
DTEND;TZID=America/Chicago:20241116T160000
DTSTAMP:20260416T212348
CREATED:20240827T024245Z
LAST-MODIFIED:20240910T193853Z
UID:5838-1731747600-1731772800@www.metalsmith.org
SUMMARY:Intro to Arc Welding 2024
DESCRIPTION:Instructor: Ben Groves\nClass Size: Max 4\, Min 2\nClass Description:\nIf you’ve ever wanted to know more about welding but didn’t have a way to do it\, here’s your chance. There’s something mysterious and magical about welding. Welders sit so close to this fountain of sparks that most people would jump back from. They join steel (and other materials) together as if they were one.\nThis one-day class will be a survey of three common modern arc welding techniques which are appropriate for hobby welding: \n\nShielded Metal Arc Welding (SMAW/Stick)\nGas Metal Arc Welding (GMAW/MIG)\nFlux Cored Arc Welding (FCAW)\n\nEach technique will be explained and demonstrated. Then the student will have hands-on time to practice.\nClass Champion: Martin Masters\nSafety Equipment – Wear clothing made of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nOther Equipment: Proper welding gloves\, welding leathers or coat\, welding helmet (We will have loaner helmets if you don’t want to buy one.)\nLunch Arrangements: Bring a bag lunch or eat at a local restaurant. \nTo register online:  click here to our website Education page\nTo register for this class with a check: Contact Marty Masters at mastersmw@yahoo.com to send a check for $150 written to The Guild of Metalsmiths.\nContact Marty with questions. mastersmw@yahoo.com or 651-285-8731\nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/intro-to-arc-welding-2024-2/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241123T090000
DTEND;TZID=America/Chicago:20241123T153000
DTSTAMP:20260416T212348
CREATED:20240827T023607Z
LAST-MODIFIED:20240827T023607Z
UID:5837-1732352400-1732375800@www.metalsmith.org
SUMMARY:'Taste' of Blacksmithing 2024
DESCRIPTION:Instructor: Rebecca Hrobak\, 612-226-8608\, rebelhornbrook@gmail.com\nClass size: Max 4 students\, min 2 students\nClass Description:\nThis is the day to try blacksmithing. All are welcome – we have designed this for the complete novice. Hammer in hand\, iron heated in the coal forge\, anvil at the ready\, you’ll be making one or more of these take-home projects: a drive-hook\, an S-hook\, a wrist cuff\, or just keep hammering and see what amazing shape comes forth? Bring your creativity\, safety glasses\, and curiosity – we supply everything else.\nSafety Equipment: Bring safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, cotton or leather gloves and leather boots or shoes.\nContact Marty Masters with any questions by email: mastersmw@yahoo.com or call/text 651-285-8731.\nLunch Arrangements: Bring a lunch\, snacks\, and water (your favorite beverage)\, there is no formal shut down to break for lunch. You can stop anytime during the class for snacks\, lunch or to rest. \nTo register for the class\, go to The Guild of Metalsmiths website and register online. Or send a check made out to: The Guild of Metalsmiths and mail check along with your contact information (student’s name\, phone number & email address) to:\nMarty Masters\n395 Bucher Ave\nShoreview\, MN  55126
URL:https://www.metalsmith.org/event/taste-of-blacksmithing-2024-2/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241207T090000
DTEND;TZID=America/Chicago:20241207T170000
DTSTAMP:20260416T212348
CREATED:20241001T171617Z
LAST-MODIFIED:20241001T171916Z
UID:5850-1733562000-1733590800@www.metalsmith.org
SUMMARY:Handled Struck Tool Class 2024
DESCRIPTION:Instructors: Bob Brown\, Wayne Olson\, Jesse Gavin\, Dave Gavin\, Herb Fick\, George Auel\nClass size: Max 8\, min 6 \n\nClass Description: The tools made will be punches with a wire handle and chisels with a wire handle. We will offer the option to use treadle hammers supplied by the teaching staff. (Find out if you really need one of these by trying them.) Tools for the treadle hammers will be supplied. Steel supplied will be 5/8 and 3/4 inch round 4140 AN for the punches and chisels. Handles will be fabricated from 1/4 and or 5/16 inch round mild steel.\nBring: Power grinders are supplied. Bring your favorite hammers and tongs suitable for the stock if you have them. So far we have never run out of Guild tools to share. Bring your basic safety gear (leather\, cotton\, gloves\, eye and ear protection and safety shoes). The building will be open by 8 am\, introductions and coffee will start at 8:30\, in the shop by 9 AM. We usually finish just before 5 pm.
URL:https://www.metalsmith.org/event/handled-struck-tool-class-2024/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241208T120000
DTEND;TZID=America/Chicago:20241208T170000
DTSTAMP:20260416T212348
CREATED:20241028T164129Z
LAST-MODIFIED:20241028T164508Z
UID:5866-1733659200-1733677200@www.metalsmith.org
SUMMARY:TGoM Membership Meeting December 2024
DESCRIPTION:Annual Meeting/Holiday Gathering is Sunday\, Dec. 8!\nTGoM’s annual holiday gathering is set for Sunday\, December 8 at the CSPS Hall in St. Paul\, MN Join Guild of Metalsmiths families at 383 Michigan St.\, St. Paul\, MN 55102\, at the corner of West 7th and  Western—map below. \nThe hall will open at noon. We usually share hors d’oeuvres as people arrive\, so bring your favorites if you wish. The annual business meeting is first on the agenda\, including awards\, elections\, and the normal business stuff starting at 1:00 pm and going on for an hour or so. \nThat leads into show and tell\, and possibly an impromptu mini-auction. By then\, we’ll all have worked up an appetite to sit down to our always delightful holiday potluck. Please bring a dish to pass. \nIf you’re a first-timer to this event\, just go upstairs at the front of the building when you get there. An elevator entrance is also located on the side just off the parking lot. Bring your family! \nAny questions about this meeting can be answered by contacting meeting champion Mike\nFrattalone at icemanfratt@aol.com. \nIf you’re interested in learning more about the CSPS\, go to their website\nhttps://www.sokolmn.org
URL:https://www.metalsmith.org/event/tgom-membership-meeting-december-2024/
LOCATION:CSPS Hall\, 383 Michigan St\, Saint Paul\, MN\, 55102\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Mike Frattalone":MAILTO:icemanfratt@aol.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250125T080000
DTEND;TZID=America/Chicago:20250125T163000
DTSTAMP:20260416T212348
CREATED:20241030T210438Z
LAST-MODIFIED:20241030T210728Z
UID:5881-1737792000-1737822600@www.metalsmith.org
SUMMARY:Box Jaw Tongs Class 2025
DESCRIPTION:Instructors:  Dave Gavin & Jesse Gavin \nClass size: Max 8\, Min 4\nClass Description: This class will have you making tongs that will hold onto ¼” X 1” flat bar stock. This class is for beginners that have gone through and have had some additional practice beyond the basics class. You will finish drawing out the reins and forging the boss to shape and matching the two different jaws to hold the stock.\nTools and Equipment or other items participants are to bring to the class: Favorite hammer for forging and peening rivets\, tongs to hold 3/4”x 3/4”\, 1/4” x 3/4”\, plus other tools as you see fit – i.e. grinder\, files\, etc.\nSafety Equipment: the usual for forging with coal: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch arrangements: local restaurants or bring your own. \nTo register online:  click here to our website Education page\nTo register with a check: Contact class manager Jesse Gavin at 1-715-808-5891 or jagavin6273@hotmail.com for instructions. \n Acceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n Updated Directions to MN School of Horseshoeing:\nTake US10 towards Elk River. Past the exits for Main St\, Anoka and Thurston Ave there is a new stop light that comes up quickly\, so be watching. Google and Apple don’t have this intersection yet. Turn Left and follow the frontage road to Tungsten St. Then turn right on Riverdale Drive. \n \n 
URL:https://www.metalsmith.org/event/box-jaw-tongs-class-2025/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250212T183000
DTEND;TZID=America/Chicago:20250212T210000
DTSTAMP:20260416T212348
CREATED:20250101T185519Z
LAST-MODIFIED:20250127T222435Z
UID:6110-1739385000-1739394000@www.metalsmith.org
SUMMARY:February 12 2025 Membership Meeting
DESCRIPTION:On Wednesday\, February 12\, 2025\, the bi-monthly membership meeting will be held at the Minnesota Transportation Museum aka: Jackson Street Roundhouse\, 193 W. Pennsylvania Ave\, St. Paul\, MN 55130. The potluck will start at 6:30 PM followed by a short business meeting\, show-n-tell and a Martin Pansch demonstration in the blacksmith shop. \nWe invite all the members to bring items for show and tell. Please remember\, items that you have shown in the past may not have been seen by new members. \nIf you have never been to this location\, it is a historical train museum. Invite someone new who is interested in the world of metalsmithing to the meeting and introduce them to the wonderful community The Guild of Metalsmiths has to offer. \nThe champion is Kim Maas tgomvolunteer@gmail.com\, and Gordon Barr agbarr@metalsmith.org is the site contact. You may contact either one of them if you have any questions.
URL:https://www.metalsmith.org/event/february-12-2025-membership-meeting/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250301T090000
DTEND;TZID=America/Chicago:20250301T170000
DTSTAMP:20260416T212348
CREATED:20250101T190228Z
LAST-MODIFIED:20250219T191728Z
UID:6111-1740819600-1740848400@www.metalsmith.org
SUMMARY:Zombie Killer / Chopping Knife 2-Day Class IS CLOSED!
DESCRIPTION:Instructor: Paul Widenhoefer \nMap to MN School of Horseshoeing \nClass size: Minimum of 4 students. Maximum of 8 students (More if there are parent/child participants) Minimum age 14. Must be accompanied by an adult.\nClass Manager: Paul Widenhoefer\, Email: pwidenhoefer@gmail.com\, (612) 408-5007 (cell) \nClass Description: Do you fear the zombie apocalypse? Do thoughts of a worldwide economic collapse and pandemics send you scurrying for your bug-out bag? Or perhaps you just want a good chopping knife capable of doing some hard work? If so\, we are offering a knife making class for you! It is designed for someone with little forging experience\, but can accommodate those with a more advanced skill set.\nWe will be covering basic knife forging\, knife design\, heat treatment\, grinding\, sharpening and attaching handles. Participants should leave with a finished (or nearly finished) primitive style knife ready for rough use. Due to time and facility limitations this is NOT a class to make a kitchen knife.\nTools and Equipment or other items participants are to bring to the class:  Forging hammer\, tongs to hold tapered flat stock.\nSafety Equipment: the usual for working at a coal forge: clothes of natural fiber\, no cuffs or frayed edges\, non-synthetic boots or shoes. Eye and ear protection are mandatory. In addition\, grinders\, torches\, and hot quenches will be used so keep long hair and shirt tails contained.\nLunch Arrangements: bring a lunch or eat at a local establishment. \nTo register online:  click here to our website Education page \nTo register with a check: Contact Paul Widenhoefer Email: pwidenhoefer@gmail.com Phone: (612) 408-500 for instructions. \n Acceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/zombie-killer-chopping-knife-2-day-class-is-closed/2025-03-01/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Paul Widenhoefer":MAILTO:pwidenhoefer@gmail.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250308T080000
DTEND;TZID=America/Chicago:20250308T170000
DTSTAMP:20260416T212348
CREATED:20250114T205246Z
LAST-MODIFIED:20250114T205246Z
UID:6119-1741420800-1741453200@www.metalsmith.org
SUMMARY:Beginning Blacksmithing Classes 1\, 2\, and 3
DESCRIPTION:Learn how to register for Beginning Blacksmithing classes scheduled for March 8\, 15\, and 22\, 2025\nBeginners Blacksmithing Class
URL:https://www.metalsmith.org/event/beginning-blacksmithing-classes-1-2-and-3/2025-03-08/
LOCATION:MN
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250329T090000
DTEND;TZID=America/Chicago:20250329T160000
DTSTAMP:20260416T212348
CREATED:20250131T221706Z
LAST-MODIFIED:20250131T221706Z
UID:6149-1743238800-1743264000@www.metalsmith.org
SUMMARY:Intro to Forge Welding 2025
DESCRIPTION:Instructor: Gordon Barr \nClass Description: How to manage the fire\, forge with and without flux\, preparing scarfs on the ends to be welded. Depending on time available\, possible projects include a flux spoon\, tripod\, chain links\, jump weld\, leaves and tendrils\, basket twist\, attaching a hard steel edge to tools. Basic forging skills needed \nTools and Equipment or other items participants are to bring to the class: Favorite hammer and tongs for 3/8 round if you have them. \nSafety Equipment: Bring safety glasses and appropriate clothing the usual for forging with coal: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes. \nLunch Arrangements:  Bring a lunch and water or dine at local fast food places \nClass Manager: (Person to whom questions should be asked) Gordon Barr\, agbarr@metalsmith.org \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education \nOr to mail in a check\, contact Gordon Barr   agbarr@metalsmith.org  to reserve a spot or for additional information. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/intro-to-forge-welding-2025/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250405T090000
DTEND;TZID=America/Chicago:20250405T130000
DTSTAMP:20260416T212348
CREATED:20250228T220319Z
LAST-MODIFIED:20250228T220319Z
UID:6178-1743843600-1743858000@www.metalsmith.org
SUMMARY:April 5 2025 Membership Meeting
DESCRIPTION:April 5 is the next Guild of Metalsmiths Membership Meeting\nOn Saturday\, April 5\, The Guild of Metalsmiths next membership meeting will be held at Midwest Knife-maker’s Supply in Mankato MN. We will meet there from 9:00 am to 1:00 pm. Be sure to bring show-n-tell items. They have a warehouse of materials that we will be able to roam through and pick up items to buy . There will be a demonstration or two about knife handles\, construction\, and materials.\nMidwest Knifemaker’s Supply\n2650 9th Ave\nMankato MN 56001\nIf you have questions about this meeting\, please contact Jesse Gavin\, email jagavin6273@hotmail.com \nInvitation to lunch after April 5 Membership Meeting \nMyron Hanson is extending an invitation to his cabin after the April Membership Meeting for a cookout. Myron will provide hamburgers\, buns\, ketchup and beans. Please bring a dish\, chips or desserts to share. You will need to bring the beverage(s) of your choice. There is a request for a Grill Chef. If you like cooking on the grill and would be willing to share your talents\, please mention it with your R.S.V.P. \n\nThe cabin’s location is: 50306 Sunset Lane\, Waterville\, MN 56096.\nTime for the cookout: Directly after the April 5 Membership Meeting.\nMyron is asking you for R.S.V.P. so proper preparations can be made. To R.S.V.P. you can call Myron at 651-338-0574 or Kim at 651-328-7219\, or email tgom.volunteer@gmail.com.\n\nTo get to the location in Mankato…(map below) \nTwo easy options to choose from: take 169 south to Mankato\, then east on Hwy 14 or come in from the east on Hwy 60 or I35 and go west on Hwy 14 to 3rd Avenue\, go north on 3rd Ave\, turn left on Summit\, left on 9th Avenue\, right into parking lot. \n \n 
URL:https://www.metalsmith.org/event/april-5-2025-membership-meeting/
LOCATION:Mankato Knifemaker’s Supply\, 2650 9th Ave\, Mankato\, MN\, 56001\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Jesse Gavin":MAILTO:jagavin6273@hotmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250412T090000
DTEND;TZID=America/Chicago:20250412T160000
DTSTAMP:20260416T212348
CREATED:20250131T222531Z
LAST-MODIFIED:20250131T224416Z
UID:6150-1744448400-1744473600@www.metalsmith.org
SUMMARY:Brass & Copper Decorative Techniques 2025
DESCRIPTION:Instructor: Sara Gries \nTechniques with patina \nClass Description: Sara Gries will share what she’s learned from years of exploring/ experimenting with brass and copper\, specifically for this class the decorative potential of various processes: etching\, creating patina (coloring) by means of chemical or heat reaction (“flame colouring”)\, plating and removal/abrasion. In addition\, she will share tips for design (how to transfer your idea to the metal\, how to make curves and fine areas appear visually smooth and balanced) and will demonstrate the practical application of cutting\, piercing\, and contouring techniques. This is not a project class\, but you’ll have several “samplers” to take home as you\, too\, explore the potential to apply these techniques to your jewelry\, knife-making\, tin work\, or copper smithing. There is no prerequisite of skills for this class. Just bring your curiosity and safety glasses. Chemicals and a micro-torch will be used for a few techniques\, so we are limiting this to adults.\nRegistration deadline is March 31st. \nSafety Equipment: Safety glasses \nSpecial Instructions: participants will be asked to bring a small sketched image to practice the transfer and etch process. Details will be provided in the acceptance letter. \nLunch Arrangements: bring your own \nClass Manager: Christina Dodge christina.guildmbr@gmail.com \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education \nOr to mail in a check\, contact Christina Dodge to reserve a spot or for additional information. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/brass-copper-decorative-techniques-2025/
LOCATION:Rick Wessling Shop\, 3442 North Washington Avenue\, Minneapolis\, MN\, 55412\, United States
CATEGORIES:Class,Upcoming
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250426T100000
DTEND;TZID=America/Chicago:20250426T130000
DTSTAMP:20260416T212348
CREATED:20250131T223618Z
LAST-MODIFIED:20250131T224219Z
UID:6152-1745661600-1745672400@www.metalsmith.org
SUMMARY:Flatware Jewelry Class 2025
DESCRIPTION:Instructor: Larry Nevin\n\n \nClass Description: Come and make a custom piece of jewelry for your favorite person or better yet\, for yourself. This class is a wonderful opportunity for beginner metal smiths and a good challenge for the advanced metal smith. \nTools and Equipment or other items participants are to bring to the class: Students will need to bring a slotted serving spoon to class. Silver\, silver plate and stainless flatware works well. \nSafety Equipment: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes. \nLunch Arrangements: Bring snacks and beverages\, we will not be breaking for lunch. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education \nOr to mail in a check\, contact Kim Maas to reserve a spot at tgom.volunteer@gmail.com \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/flatware-jewelry-class-2025/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250503T090000
DTEND;TZID=America/Chicago:20250503T160000
DTSTAMP:20260416T212348
CREATED:20250331T222201Z
LAST-MODIFIED:20250331T223253Z
UID:6195-1746262800-1746288000@www.metalsmith.org
SUMMARY:A Taste of Blacksmithing 2025
DESCRIPTION:Instructor: Rebecca Hrobak\, 612-226-8608\, rebelhornbrook@gmail.com\nClass size: Maximum students: 10; Minimum students: 6 – Must be 18 years of age. \nS-Hooks \nThis is the day to try blacksmithing. We have designed this for the complete novice. Hammer in hand\, iron heated in the coal forge\, anvil at the ready\, you’ll be making one or more of these take-home projects: a drive hook\, an S-hook or just keep hammering and see what amazing shape comes forth. Bring your creativity\, safety glasses\, and curiosity. We supply everything else. \nTo register for this class\, go to: https://stpaul.ce.eleyo.com/course/16723/spring-2025-adult/a-taste-of-blacksmithing
URL:https://www.metalsmith.org/event/a-taste-of-blacksmithing-2025/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250510T080000
DTEND;TZID=America/Chicago:20250510T170000
DTSTAMP:20260416T212348
CREATED:20250228T222111Z
LAST-MODIFIED:20250228T222111Z
UID:6179-1746864000-1746896400@www.metalsmith.org
SUMMARY:Hammer Making Class 2025
DESCRIPTION:Instructors: Derrick Phillips & others\nClass size: Max 8\, min. 4\nClass Description: It is recommended that anyone wishing to take this class have taken at least a few days long beginners class\, and have several weeks of forging time. This will help ensure a certain comfort at the forge and with hot metal\, as this class works with a larger hot piece. This class will teach you the skills you need to make a basic rounding hammer. With this knowledge you will then be able to expand your tool chest with other handled tools. All handled tools such as top fullers\, punches and flatters start with this same process. We will begin with a piece of tool steel\, punch the eye\, shape both striking ends\, heat treat and add the handle. You will go home with your own hammer. There will be an assortment of weights to choose from so you can make a hammer to fit your size and needs. This is an intermediate skill level class\nTools and Equipment or other items participants are to bring to the class: Bring your favorite hammers; one for striking hot metal and one for striking punches and drifts. A tongs for holding 1-1/2″ square stock if you have that size\nSafety Equipment: the usual for forging with coal: safety glasses\, hearing protection\, respirator or dust mask for grinding\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nSpecial Instructions: This class can run late just to give a heads up\nLunch Arrangements: Bring your own lunch or eat at one of the local establishments. We will take an hour break around noon. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education\nOr to mail in a check\, contact Derrick Phillips at derrickphillipsa3o3@gmail.com to reserve a spot. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n \n  \n 
URL:https://www.metalsmith.org/event/hammer-making-class-2025/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Derrick Phillips":MAILTO:derrick_phillips@q.com
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250517T090000
DTEND;TZID=America/Chicago:20250517T160000
DTSTAMP:20260416T212348
CREATED:20250228T223116Z
LAST-MODIFIED:20250228T223116Z
UID:6180-1747472400-1747497600@www.metalsmith.org
SUMMARY:Intro to Arc Welding 2025
DESCRIPTION:Instructor: Ben Groves                           Class size: Max 4\, min 3\nDescription: For this class\, the Beginners Blacksmithing Class is a requirement. Are you tired of buying your sweetheart a beautiful bouquet of flowers\, just to find them in the garbage a week later? Here is an opportunity to learn how to make Calla Lilies. After taking this class\, you can make your sweetheart a bouquet that will last forever\, reminding them how much you care. No sweetheart\, no problem…make them for yourself.\nTools and Equipment or other items participants are to bring to the class: Square faced and/or cross pein hammer\, scrolling pliers\nSafety Equipment: the usual for forging with coal: gloves\, safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch arrangements: Bring lunch or visit one of the many restaurant choices in the area. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education\nOr to mail in a check\, contact Marty Masters\, mastersmw@yahoo.com for information. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/intro-to-arc-welding-2025/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250518T090000
DTEND;TZID=America/Chicago:20250518T150000
DTSTAMP:20260416T212348
CREATED:20250331T222510Z
LAST-MODIFIED:20250420T193915Z
UID:6196-1747558800-1747580400@www.metalsmith.org
SUMMARY:Open Forge
DESCRIPTION:FREE MEMBERS ONLY Open Forge and Potluck May 18th\nThis event is open to all Guild members. There is no lesson or agenda except to get some iron hot and hit it with a hammer and hang out with fellow blacksmiths. There are sign ups that will guarantee you a forge space. If you just want to stop by and hang out\, you are welcome to do so. If there’s space at a forge\, have at it. \nInstructors: Harvey Steele in the morning\, Marty Masters in the afternoon.\nLocation  MN School of Horseshoeing . Map see below.\nClass Manager: Marty Masters 651-285-8731\nPrice of Class:  FREE TO MEMBERS ONLY\nSafety Equipment: the usual for forging with coal: gloves\, safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch arrangement: Potluck\, bring a dish to share. 
URL:https://www.metalsmith.org/event/open-forge/
LOCATION:MN School of Horseshoeing\, 6250 Riverdale Dr\, NW\, Ramsey\, MN\, 55303\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
GEO:45.218009;-93.426719
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=MN School of Horseshoeing 6250 Riverdale Dr NW Ramsey MN 55303 United States;X-APPLE-RADIUS=500;X-TITLE=6250 Riverdale Dr\, NW:geo:-93.426719,45.218009
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250531T090000
DTEND;TZID=America/Chicago:20250531T160000
DTSTAMP:20260416T212348
CREATED:20250228T223451Z
LAST-MODIFIED:20250228T224557Z
UID:6181-1748682000-1748707200@www.metalsmith.org
SUMMARY:Calla Lily Class 2025
DESCRIPTION:Instructor: Myron Hanson                     Class size: Max 10\, min 4  \nDescription: For this class\, the Beginners Blacksmithing Class is a requirement. Are you tired of buying your sweetheart a beautiful bouquet of flowers\, just to find them in the garbage a week later? Here is an opportunity to learn how to make Calla Lilies. After taking this class\, you can make your sweetheart a bouquet that will last forever\, reminding them how much you care. No sweetheart\, no problem…make them for yourself.\nTools and Equipment or other items participants are to bring to the class: Square faced and/or cross pein hammer\, scrolling pliers\nSafety Equipment: the usual for forging with coal: gloves\, safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch arrangements: Bring lunch or visit one of the many restaurant choices in the area. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education\nOr to mail in a check\, contact Kim Maas\, 651-328-7219\, tgom.volunteer@gmail.com for additional information. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/calla-lily-class-2025/
LOCATION:Myron Hanson’s Shop\, 4015 Dodd Rd\, Eagan\, MN\, 55123-1612\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.811273;-93.115724
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Myron Hanson’s Shop 4015 Dodd Rd Eagan MN 55123-1612 United States;X-APPLE-RADIUS=500;X-TITLE=4015 Dodd Rd:geo:-93.115724,44.811273
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250601T090000
DTEND;TZID=America/Chicago:20250601T160000
DTSTAMP:20260416T212348
CREATED:20250228T223831Z
LAST-MODIFIED:20250228T224658Z
UID:6182-1748768400-1748793600@www.metalsmith.org
SUMMARY:Leaf Class 2025
DESCRIPTION:Instructor: Myron Hanson                     Class size: Max 6\, min 4 \nDescription: This is an intermediate class. This leaf can be used in many elements such as railings for staircases\, paper towel holders\, curtain rods—let your imagination be your guide. This class will expand your skills set.\nTools and Equipment or other items participants are to bring to the class:\nSquare faced and cross-pein hammer\, scrolling pliers\nSafety Equipment: the usual for forging with coal: gloves\, safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch Arrangements: Bring lunch or visit one of the many restaurant choices in the area. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education\nOr to mail in a check\, contact Kim Maas\, 651-328-7219\, tgom.volunteer@gmail.com for additional information. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/leaf-class-2025/
LOCATION:Myron Hanson’s Shop\, 4015 Dodd Rd\, Eagan\, MN\, 55123-1612\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
GEO:44.811273;-93.115724
X-APPLE-STRUCTURED-LOCATION;VALUE=URI;X-ADDRESS=Myron Hanson’s Shop 4015 Dodd Rd Eagan MN 55123-1612 United States;X-APPLE-RADIUS=500;X-TITLE=4015 Dodd Rd:geo:-93.115724,44.811273
END:VEVENT
END:VCALENDAR