BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//The Guild of Metalsmiths - ECPv6.15.15//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:The Guild of Metalsmiths
X-ORIGINAL-URL:https://www.metalsmith.org
X-WR-CALDESC:Events for The Guild of Metalsmiths
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20140309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20141102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20150308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20151101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20160313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20161106T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20170312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20171105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20180311T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20181104T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20190310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20191103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20200308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20201101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20210314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20211107T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20220313T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20221106T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20230312T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20231105T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20240310T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20241103T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20260516T090000
DTEND;TZID=America/Chicago:20260516T160000
DTSTAMP:20260728T030744
CREATED:20260331T204644Z
LAST-MODIFIED:20260331T205150Z
UID:6686-1778922000-1778947200@www.metalsmith.org
SUMMARY:Intro to Arc Welding Class 2026
DESCRIPTION:Instructor: Marty Masters \nClass Description: If you’ve ever wanted to know more about welding\, but didn’t have a way to do it\, here’s your chance. There’s something mysterious and magical about welding. Welders sit so close to this fountain of sparks that most people would jump back from. They join steel (and other materials) together as if they were one. \nThis one-day class will be a survey of three common modern arc welding techniques which are appropriate for hobby welding: \n\nShielded Metal Arc Welding (SMAW/Stick)\nGas Metal Arc Welding (GMAW/MIG)\nFlux Cored Arc Welding (FCAW)\n\nEach technique will be explained and demonstrated. Then the student will have hands-on time to practice. \nClass Manager:  Marty Masters   651-285-8731 \nSafety Equipment: Wear clothing made of natural fiber with no cuffs or fraying\, and leather boots or shoes. Proper welding gloves\, welding leathers or coat\, welding helmet (We will have loaner helmets and some gloves if you don’t want to buy.) \nLunch Arrangements: Bring your own lunch or eat at one of the local establishments. We will take an hour break around noon. Also\, bring plenty of water to keep you hydrated during the class. \nTo Register:  \nTo register online go to The Guild of Metalsmiths website\,\nhttps://www.metalsmith.org/education \nOr to mail in a check\, contact class manager shown above to reserve your place in the class and receive additional information on where to mail the check. \nMinors (under 18) must have a parent present. Minors under 14 need one adult per child. There will be no sharing of forges. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually \nJackson Street Roundhouse
URL:https://www.metalsmith.org/event/intro-to-arc-welding-class-2026/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250517T090000
DTEND;TZID=America/Chicago:20250517T160000
DTSTAMP:20260728T030744
CREATED:20250228T223116Z
LAST-MODIFIED:20250228T223116Z
UID:6180-1747472400-1747497600@www.metalsmith.org
SUMMARY:Intro to Arc Welding 2025
DESCRIPTION:Instructor: Ben Groves                           Class size: Max 4\, min 3\nDescription: For this class\, the Beginners Blacksmithing Class is a requirement. Are you tired of buying your sweetheart a beautiful bouquet of flowers\, just to find them in the garbage a week later? Here is an opportunity to learn how to make Calla Lilies. After taking this class\, you can make your sweetheart a bouquet that will last forever\, reminding them how much you care. No sweetheart\, no problem…make them for yourself.\nTools and Equipment or other items participants are to bring to the class: Square faced and/or cross pein hammer\, scrolling pliers\nSafety Equipment: the usual for forging with coal: gloves\, safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nLunch arrangements: Bring lunch or visit one of the many restaurant choices in the area. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education\nOr to mail in a check\, contact Marty Masters\, mastersmw@yahoo.com for information. \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/intro-to-arc-welding-2025/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250426T100000
DTEND;TZID=America/Chicago:20250426T130000
DTSTAMP:20260728T030744
CREATED:20250131T223618Z
LAST-MODIFIED:20250131T224219Z
UID:6152-1745661600-1745672400@www.metalsmith.org
SUMMARY:Flatware Jewelry Class 2025
DESCRIPTION:Instructor: Larry Nevin\n\n \nClass Description: Come and make a custom piece of jewelry for your favorite person or better yet\, for yourself. This class is a wonderful opportunity for beginner metal smiths and a good challenge for the advanced metal smith. \nTools and Equipment or other items participants are to bring to the class: Students will need to bring a slotted serving spoon to class. Silver\, silver plate and stainless flatware works well. \nSafety Equipment: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, and leather boots or shoes. \nLunch Arrangements: Bring snacks and beverages\, we will not be breaking for lunch. \nTo register online go to The Guild of Metalsmiths website\, https://www.metalsmith.org/education \nOr to mail in a check\, contact Kim Maas to reserve a spot at tgom.volunteer@gmail.com \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/flatware-jewelry-class-2025/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20250212T183000
DTEND;TZID=America/Chicago:20250212T210000
DTSTAMP:20260728T030744
CREATED:20250101T185519Z
LAST-MODIFIED:20250127T222435Z
UID:6110-1739385000-1739394000@www.metalsmith.org
SUMMARY:February 12 2025 Membership Meeting
DESCRIPTION:On Wednesday\, February 12\, 2025\, the bi-monthly membership meeting will be held at the Minnesota Transportation Museum aka: Jackson Street Roundhouse\, 193 W. Pennsylvania Ave\, St. Paul\, MN 55130. The potluck will start at 6:30 PM followed by a short business meeting\, show-n-tell and a Martin Pansch demonstration in the blacksmith shop. \nWe invite all the members to bring items for show and tell. Please remember\, items that you have shown in the past may not have been seen by new members. \nIf you have never been to this location\, it is a historical train museum. Invite someone new who is interested in the world of metalsmithing to the meeting and introduce them to the wonderful community The Guild of Metalsmiths has to offer. \nThe champion is Kim Maas tgomvolunteer@gmail.com\, and Gordon Barr agbarr@metalsmith.org is the site contact. You may contact either one of them if you have any questions.
URL:https://www.metalsmith.org/event/february-12-2025-membership-meeting/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241123T090000
DTEND;TZID=America/Chicago:20241123T153000
DTSTAMP:20260728T030744
CREATED:20240827T023607Z
LAST-MODIFIED:20240827T023607Z
UID:5837-1732352400-1732375800@www.metalsmith.org
SUMMARY:'Taste' of Blacksmithing 2024
DESCRIPTION:Instructor: Rebecca Hrobak\, 612-226-8608\, rebelhornbrook@gmail.com\nClass size: Max 4 students\, min 2 students\nClass Description:\nThis is the day to try blacksmithing. All are welcome – we have designed this for the complete novice. Hammer in hand\, iron heated in the coal forge\, anvil at the ready\, you’ll be making one or more of these take-home projects: a drive-hook\, an S-hook\, a wrist cuff\, or just keep hammering and see what amazing shape comes forth? Bring your creativity\, safety glasses\, and curiosity – we supply everything else.\nSafety Equipment: Bring safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, cotton or leather gloves and leather boots or shoes.\nContact Marty Masters with any questions by email: mastersmw@yahoo.com or call/text 651-285-8731.\nLunch Arrangements: Bring a lunch\, snacks\, and water (your favorite beverage)\, there is no formal shut down to break for lunch. You can stop anytime during the class for snacks\, lunch or to rest. \nTo register for the class\, go to The Guild of Metalsmiths website and register online. Or send a check made out to: The Guild of Metalsmiths and mail check along with your contact information (student’s name\, phone number & email address) to:\nMarty Masters\n395 Bucher Ave\nShoreview\, MN  55126
URL:https://www.metalsmith.org/event/taste-of-blacksmithing-2024-2/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20241116T090000
DTEND;TZID=America/Chicago:20241116T160000
DTSTAMP:20260728T030744
CREATED:20240827T024245Z
LAST-MODIFIED:20240910T193853Z
UID:5838-1731747600-1731772800@www.metalsmith.org
SUMMARY:Intro to Arc Welding 2024
DESCRIPTION:Instructor: Ben Groves\nClass Size: Max 4\, Min 2\nClass Description:\nIf you’ve ever wanted to know more about welding but didn’t have a way to do it\, here’s your chance. There’s something mysterious and magical about welding. Welders sit so close to this fountain of sparks that most people would jump back from. They join steel (and other materials) together as if they were one.\nThis one-day class will be a survey of three common modern arc welding techniques which are appropriate for hobby welding: \n\nShielded Metal Arc Welding (SMAW/Stick)\nGas Metal Arc Welding (GMAW/MIG)\nFlux Cored Arc Welding (FCAW)\n\nEach technique will be explained and demonstrated. Then the student will have hands-on time to practice.\nClass Champion: Martin Masters\nSafety Equipment – Wear clothing made of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nOther Equipment: Proper welding gloves\, welding leathers or coat\, welding helmet (We will have loaner helmets if you don’t want to buy one.)\nLunch Arrangements: Bring a bag lunch or eat at a local restaurant. \nTo register online:  click here to our website Education page\nTo register for this class with a check: Contact Marty Masters at mastersmw@yahoo.com to send a check for $150 written to The Guild of Metalsmiths.\nContact Marty with questions. mastersmw@yahoo.com or 651-285-8731\nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \n 
URL:https://www.metalsmith.org/event/intro-to-arc-welding-2024-2/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240928T090000
DTEND;TZID=America/Chicago:20240928T160000
DTSTAMP:20260728T030744
CREATED:20240801T191432Z
LAST-MODIFIED:20240801T193748Z
UID:5809-1727514000-1727539200@www.metalsmith.org
SUMMARY:Engraving Class 2024
DESCRIPTION:Instructor:              William Breczinski  brecwill@gmail.com  \nDescription:       This is a class on how to add decorations to your metal project. Engraving is a time-honored art form that can be as simple as a few scratches to as intricate as a fowling piece fit for royalty.  Personally\, I’ve wanted to add this skill to my collection for a long time\, which is why I’ve organized this class. William Breczinski was the recipient of an educational grant from the Guild\, and this is his first opportunity to share the knowledge that he gained. The class requires no previous experience.  \nClass Manager: Martin Masters  mastersmw@yahoo.com 651-285-8731 \nTools and Equipment or other items participants are to bring to the class: small hammer \nSafety Equipment – Eye and ear protection \nLunch Arrangements: Bring your own food. There are restaurants in the area. \nTo register online:  click here to our website Education page \nTo register for this class with a check: Send a check for $75 written to The Guild of Metalsmiths to: \nMartin Masters\n395 Bucher Ave.\nShoreview\, MN 55126 \nContact Marty with questions. mastersmw@yahoo.com or 651-285-8731 \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually. \nJackson Street Roundhouse \n 
URL:https://www.metalsmith.org/event/engraving-class-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240511T083000
DTEND;TZID=America/Chicago:20240511T160000
DTSTAMP:20260728T030744
CREATED:20240227T200314Z
LAST-MODIFIED:20240301T182824Z
UID:5711-1715416200-1715443200@www.metalsmith.org
SUMMARY:Intro to Arc Welding 2024
DESCRIPTION:Instructor: Ben Groves\nClass size: Max 4\, Min 4\nDescription: \nIf you’ve ever wanted to know more about welding\, but didn’t have a way to do it\, here’s your chance. There’s something mysterious and magical about welding. Welders sit so close to this fountain of sparks that most people would jump back from. This one-day class will be a survey of three common modern arc welding techniques which are appropriate for hobby welding: \n\nShielded Metal Arc Welding (SMAW/Stick)\nGas Metal Arc Welding (GMAW/MIG)\nFlux Cored Arc Welding (FCAW)\n\nEach technique will be explained and demonstrated. Then the student will have hands-on time to practice. \nSafety Equipment – Wear clothing made of natural fiber with no cuffs or fraying\, and leather boots or shoes.\nOther Equipment: Proper welding gloves\, welding leathers or coat\, welding helmet.\nLunch Arrangements: Bring a bag lunch or eat at a local restaurant.\nTo register for this class with a check:  Send a check for $100 written to -The Guild of Metalsmiths to:\nMartin Masters\n395 Bucher Ave.\nShoreview\, MN 55126\nTo register online:  click here to our website Education page\nContact Marty with questions.  mastersmw@yahoo.com  or 651-285-8731 \nAcceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.\n \nJackson Street Roundhouse \n  \n  \n 
URL:https://www.metalsmith.org/event/intro-to-arc-welding-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Marty Masters":MAILTO:martin.masters@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240420T090000
DTEND;TZID=America/Chicago:20240420T170000
DTSTAMP:20260728T030744
CREATED:20240201T155052Z
LAST-MODIFIED:20240201T155500Z
UID:5690-1713603600-1713632400@www.metalsmith.org
SUMMARY:Wire Inlay Class 2024
DESCRIPTION:Instructor:        Martin Pansch\, 612-599-4762     blacksmithingyeti@gmail.com\nCost:                  $55.00\,  $65.00 for non-Guild members\nClass size:         Maximum 8\, minimum 4 students\nClass Description:\nThe class will focus on wire inlay into mild steel. This is a technique that can be used to add decorative elements to many of your projects.  Students will chase grooves in the metal and then chase the bottoms of the grooves square. The two corners thus created will be chased to form an undercut channel. The upper edges of the channels will be chased and filed to create grooves of even width. Copper wire will be planished into the grooves so that the softer metal forms to fit the undercut and it locked in place. Surfaces will then be filed smooth leaving a pattern to  This class will concentrate on the basics of the straight lines\, curved lines\, and dots. We’ll cover both wire that is filed flush with the surface of the steel and left as a raised bead. \nTools and Equipment or other items participants are to bring to the class. \nStudents will need a light\, soft face hammer for striking tools. This hammer should be light enough that thousands of blows will not be tiring. A cheap Chinese ball peen will likely need no softening. Additional tools include: A mill file\, a hack saw\, sand paper\, sharpening stones (a diamond lap plate works well)\, paper\, pencil\, Sharpie ™. Students may consider bringing a supplemental light source or other visual enhancement aids as needed. Bring a stool if you prefer to work sitting. \nA basic set of small chisels will be provided for students for use in the class. Those over-achievers who want to make their own prior to class can request detailed descriptions of the needed tools. \nSafety Equipment – safety glasses & ear plugs are mandatory. \nLunch arrangements: Either bring a bag lunch with you or money to dine at some of the establishments in the area. \nClass manager is Gordon Barr. For questions\, contact Gordon at agbarr@aol.com   952-894-4821 \nTo register online:  click here to our website Education page \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually \n 
URL:https://www.metalsmith.org/event/wire-inlay-class-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240413T090000
DTEND;TZID=America/Chicago:20240413T153000
DTSTAMP:20260728T030744
CREATED:20240227T193155Z
LAST-MODIFIED:20240301T171101Z
UID:5708-1712998800-1713022200@www.metalsmith.org
SUMMARY:'Taste of Blacksmithing' 2024
DESCRIPTION:Instructor: Rebecca Hrobak \nClass size: Max 4\, min 4\nChampion: Kim Maas\, 651-328-7219\, TGoMvolunteer@gmail.com \nDescription:  This is the day to try blacksmithing. All are welcome. We have designed this for the complete novice. Hammer in hand\, iron heated in the coal forge\, anvil at the ready\, you’ll be making one or more of these take-home projects shown at right: a drive-hook\, an S-hook\, a wrist cuff (Viking armband\, anyone?)\, or just keep hammering and see what amazing shape comes forth. Bring:  your creativity\, safety glasses\, and curiosity. We supply everything else.\nSafety Equipment: safety glasses\, hearing protection\, clothing of natural fiber with no cuffs or fraying\, cotton or leather gloves and leather boots or shoes.\nLunch Arrangements: Bring lunch\, snacks\, and water or your favorite beverage. There is no formal shut down to break for lunch. You can stop any time during the class for snacks\, lunch\, or to rest. \nTo register for the class online\, follow the link below: \nhttps://www.metalsmith.org/education/ \nTo register with a check:  Send a check for $65 written to: The Guild of Metalsmiths and mail check along with your contact information (phone number & email address) to:\nKim Maas\n965 Gorman Ave.\nWest St. Paul\, MN  55118 \n Acceptance will be in the order submitted\, based on the online transaction date or postage date\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/taste-of-blacksmithing-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20240210T100000
DTEND;TZID=America/Chicago:20240210T130000
DTSTAMP:20260728T030744
CREATED:20231101T165907Z
LAST-MODIFIED:20231101T170104Z
UID:5630-1707559200-1707570000@www.metalsmith.org
SUMMARY:Copper Jewelry Class 2024
DESCRIPTION:Location:            Jackson Street Roundhouse blacksmith shop (MN Transportation Museum)\, 193 Pennsylvania Ave. E.\, St. Paul\, MN  55113\nInstructor:          Larry Nevin\nCost:                   $65 members; $75 non-members\nClass size:         8 maximum (18years + )\nClass manager: Kim Maas\, 651-328-7219 \, TGoMvolunteer@gmail.com \nDescription: A Copper Jewelry Class will be held Saturday\, February 10\, 2024\, from 10:00 am to 1:00 pm at the Jackson Street Roundhouse just in time for Valentines Day. Come and make a custom piece of jewelry for your favorite Valentine or\, better yet\, for yourself. This class is a wonderful opportunity for beginner metalsmiths and a good challenge for the advanced metalsmith. The class is offered to adults only\, 18+. The maximum class size is limited to 8. so don’t wait to register. \nTo register: Mail your name\, address\, phone number and email address along with a check\nwritten to The Guild of Metalsmiths ($65 for members\, $75 for non-members) to:\nKim Maas\n965 Gorman Ave\nWest St. Paul\, MN 55118 \nTo register online\, follow this link: https://www.metalsmith.org/education/\nPlease feel free to call 651-328-7219 with questions. \nAcceptance priority for this class will be determined by postmark\, and each person will be notified individually.
URL:https://www.metalsmith.org/event/copper-jewelry-class-2024/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20230208T183000
DTEND;TZID=America/Chicago:20230208T203000
DTSTAMP:20260728T030744
CREATED:20221201T165847Z
LAST-MODIFIED:20221201T165847Z
UID:5491-1675881000-1675888200@www.metalsmith.org
SUMMARY:TGoM Membership Meeting February 2023
DESCRIPTION:The Wednesday\, February 8\, 2023\, membership meeting will be at the Jackson Street Roundhouse. (193 W. Pennsylvania Ave\, St. Paul\, MN 55130)\nFor the meeting\, we will have blacksmithing and tool sharpening demonstrations in the blacksmith shop.\nWe invite all the members to bring items for show and tell. Please remember items that you have shown in the past may not have been seen by some of the newer members.\nThe usual potluck will start at 6:30 followed by a short business meeting\, then show and tell. The champion is Kim Maas (TGoMvolunteer@gmail)\, and Gordon Barr (agbarr@metalsmith.org) is the site contact\, so contact either one of them if you have any questions\nIf you have never been to this location\, it is loaded with history and activities for the entire family. Check out their website at\nhttps://www.transportationmuseum.org. If you look at\nhttps://mtm.my-free.website/blacksmith-forge\, you may see some of the pictures of what the blacksmith shop looked like when Nick Heinen\, Charlie Bateman and Gordon Barr created it in 2012.\nInvite and bring someone new who is interested in the world of metalsmithing to the February Membership Meeting. Show them the wonderful community The Guild of Metalsmiths has to offer.\nJackson Street Roundhouse\, 193 W. Pennsylvania Ave\, St. Paul\, MN 55130 at the Minnesota Transportation Museum
URL:https://www.metalsmith.org/event/tgom-membership-meeting-february-2023/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Kim Maas":MAILTO:TGoM.volunteer@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20180623T090000
DTEND;TZID=America/Chicago:20180623T110000
DTSTAMP:20260728T030744
CREATED:20180402T215027Z
LAST-MODIFIED:20180402T215027Z
UID:4386-1529744400-1529751600@www.metalsmith.org
SUMMARY:Antikythera Mechanism Lecture
DESCRIPTION:Join us for a discussion\, slide show\, and videos of the historic first model built of the world’s oldest  analog computer and orrery\, the Antikythera Mechanism. Included will be a brief history of its discovery\, explanation of its analysis\, description of the functions and features it includes\, as well as details on the methods used for construction.\nI was fortunate enough to spend a day in London with builder Michael Wright\, as he shared his model with me describing the unique features of how it operates\, explaining how he analyzed the fragments and then constructed the model\, plus showing me his workshop and the tools he used for the build\n— Dean Ziegenbein\nTo register for this lecture\, send a check for $10 made out to “Guild of Metalsmiths” to:\nChristina Dodge\n17645 Baugh St NW\nRamsey\, MN 55303\nQuestions: christina.guildmbr@gmail.com or 612-741-9292
URL:https://www.metalsmith.org/event/antikythera-mechanism-lecture/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Activity,Upcoming
ORGANIZER;CN="Christina Dodge":MAILTO:christina.guildmbr@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20180414T090000
DTEND;TZID=America/Chicago:20180414T160000
DTSTAMP:20260728T030744
CREATED:20180330T012856Z
LAST-MODIFIED:20180330T013612Z
UID:4364-1523696400-1523721600@www.metalsmith.org
SUMMARY:2018 Wire Inlay Class IS FULL!
DESCRIPTION:Instructors: Martin Pansch\, Stephen Olivo \nThe class will focus on wire inlay into mild steel. This is a technique that can be used to add decorative elements to many of your projects. Students will chase grooves in the metal and then chase the bottoms of the grooves square. The two corners thus created will be chased to form an undercut channel. The upper edges of the channels will be chased and filed to create grooves of even width. Copper wire will be planished into the grooves so that the softer metal forms to fit the undercut and it locked in place. Surfaces will then be filed smooth leaving a pattern to show the differ color of the metals. Copper wire will be provided to practice inlay on flat pieces that can be held firmly in a vise.\nThis class will concentrate on the basics of the straight lines\, curved lines\, and dots. We’ll cover both wire that is filed flush with the surface of the steel and left as a raised bead.\nRequired Equipment: A basic set of small chisels will be provided for students for use in the class. Those over achievers who want to make their own prior to class can request detailed descriptions of the needed tools. Students will also need a light\, soft face hammer for striking tools.\nThis hammer should be light enough that thousands of blows will not be tiring. A cheap Chinese ball peen will likely need no softening. Additional tools include: A mill file\, a hack saw\, sand paper\, sharpening stones (a diamond lap plate works well)\, paper\, pencil\, Sharpie TM. Students may consider bringing a supplemental light source or other visual enhancement aids as needed.\nSafety Equipment – safety glasses & ear plugs mandatory.\nLunch Arrangements: Either bring a bag lunch with you or money for the fine dining establishments in the area.\nTo register for this class\, simply forward your interest\, a send a check for $55 made out to “Guild of Metalsmiths” and your complete contact info to:\nMartin Pansch\n201 Nevada Street\nNorthfield\, MN 55057\nCall or contact Martin at (612) 599-4762   or   blacksmithingyeti@gmail.com\nAcceptance priority for this class is determined by postmark.
URL:https://www.metalsmith.org/event/2018-wire-inlay-class-is-full/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Martin Pansch":MAILTO:blacksmithingyeti@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20171011T183000
DTEND;TZID=America/Chicago:20171011T210000
DTSTAMP:20260728T030744
CREATED:20171010T004934Z
LAST-MODIFIED:20171010T004934Z
UID:4265-1507746600-1507755600@www.metalsmith.org
SUMMARY:October 2017 Membership Meeting
DESCRIPTION:The October 11th Guild meeting will be held at the Jackson Street Roundhouse (193 W Pennsylvania Ave\, St Paul\, MN 55130).\nFor the meeting we will not plan for any demonstrations but invite all our members to bring in pieces of metalwork or other items that they have made or acquired over the years. We have just celebrated our 40th year\, so there is bound to be something not shown in awhile. Please remember items you have shown before have not been seen by everyone and especially newer members\, kind of an extended show and tell. Some folks have major collections others not yet; but if it intrigued you\, it will probably intrigue someone else. Incomplete works are great as well\, as much can be learned by seeing some of the stages along the way. We have been here before\, but maybe we will see and/or share something new.\nThe usual potluck (bring a dish to pass) begins at 6:30 pm\, with the business meeting\, and show and tell to happen after that. The champion for this meeting is Derrick Phillips. Contact him at derrick_phillips@q.com if you have questions.\nIf you’ve never been to this location\, it’s loaded with history and activities for the entire family. Check out the website here:  http://www.transportationmuseum.org The roundhouse itself is one of the last operating railroad roundhouses in the country. And inside the machine shop is the blacksmith shop created and developed by TGoM members\, principally Charlie Bateman\, Nick Heinen\, Gordon Barr\, and others.
URL:https://www.metalsmith.org/event/october-2017-membership-meeting/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Derrick Phillips":MAILTO:derrick_phillips@q.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20161015T090000
DTEND;TZID=America/Chicago:20161015T120000
DTSTAMP:20260728T030744
CREATED:20160908T173634Z
LAST-MODIFIED:20160908T173721Z
UID:3979-1476522000-1476532800@www.metalsmith.org
SUMMARY:Clock Theory and the Blacksmith 2016
DESCRIPTION:Instructor: Susan Wood\nThis class will include a lecture and images on how clock mechanisms are designed and built\, including the influence of the blacksmith in early clocks and tools. We will cover the evolution of escapements from foliot to pendulum to balance wheel. How sources of power influence the mechanism with weights springs fusee and Geneva stops. We will do the math of gear ratios and tooth profiles. There will be a look into time trains\, chime trains\, and strike trains and how they work together. We will look at how early clocks were hand-built\, then the first machines built by blacksmiths that clockmakers used. This will be a 2 to 3 hour class with lots of close up looks at different clocks and much room for questions and inspiration.\nBring: Pen/pencil\, notepad and maybe a calculator.\nSafety Equipment: none required\nRegister: to register for this class\, send a check for $15 made out to\nThe Guild of Metalsmiths to:\nMartin Pansch\n8750 Yale Avenue\nYoung America\, MN 55397\n(612) 599-4762\nblacksmithingyeti@gmail.com
URL:https://www.metalsmith.org/event/clock-theory-and-the-blacksmith-2016/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Martin Pansch":MAILTO:blacksmithingyeti@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20160409T130000
DTEND;TZID=America/Chicago:20160409T150000
DTSTAMP:20260728T030744
CREATED:20160401T201033Z
LAST-MODIFIED:20160401T201033Z
UID:3812-1460206800-1460214000@www.metalsmith.org
SUMMARY:Copper Jewelry-Afternoon Class 2016
DESCRIPTION:Instructor: Larry Nevin\nThis is the second of two classes to be held on April 9\, one in the morning\, one in the afternoon.\nThe students in this class will build copper earrings\, a bracelet and a pendant as time permits during the class. All materials and tools will be provided.\nThe material is 20 to 24 gauge copper. There is no forging. All the work is bench work hammer forming\, shearing\, punching and drilling. The class will last approximately 3 hours so you can choose either the morning or afternoon session.\nSafety Equipment – safety glasses & ear plugs are mandatory.\nTo reigster for one of these classes\, please send your name\, address\, phone\, and email address along with a check for $30 written to The Guild of Metalsmiths to:\nGordon Barr\n11021 27th Ave\nBurnsville\, MN 55337\nIf you have questions\, contact Gordon at agbarr@aol.com\nAcceptance priority is determined by postmark.
URL:https://www.metalsmith.org/event/copper-jewelry-afternoon-class-2016/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20160409T090000
DTEND;TZID=America/Chicago:20160409T120000
DTSTAMP:20260728T030744
CREATED:20160401T200847Z
LAST-MODIFIED:20160401T201107Z
UID:3811-1460192400-1460203200@www.metalsmith.org
SUMMARY:Copper Jewelry-Morning Class 2016
DESCRIPTION:Instructor: Larry Nevin\nThis is the first of two classes to be held on April 9\, one in the morning\, one in the afternoon.\nThe students in this class will build copper earrings\, a bracelet and a pendant as time permits during the class. All materials and tools will be provided.\nThe material is 20 to 24 gauge copper. There is no forging. All the work is bench work hammer forming\, shearing\, punching and drilling. The class will last approximately 3 hours so you can choose either the morning or afternoon session.\nSafety Equipment – safety glasses & ear plugs are mandatory.\nTo reigster for one of these classes\, please send your name\, address\, phone\, and email address along with a check for $30 written to The Guild of Metalsmiths to:\nGordon Barr\n11021 27th Ave\nBurnsville\, MN 55337\nIf you have questions\, contact Gordon at agbarr@aol.com\nAcceptance priority is determined by postmark.
URL:https://www.metalsmith.org/event/copper-jewelry-morning-class-2016/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20151107T090000
DTEND;TZID=America/Chicago:20151107T170000
DTSTAMP:20260728T030744
CREATED:20150929T191950Z
LAST-MODIFIED:20151026T203411Z
UID:3748-1446886800-1446915600@www.metalsmith.org
SUMMARY:2015 Wire Inlay Class-2nd day cancelled
DESCRIPTION:This 2-day class has been cancelled. First day was in October\, but cancelled.
URL:https://www.metalsmith.org/event/2015-wire-inlay-class-2nd-day-cancelled/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Class,Upcoming
ORGANIZER;CN="Larry Wasmund":MAILTO:poundedtreasures@gmail.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20151014T180000
DTEND;TZID=America/Chicago:20151014T210000
DTSTAMP:20260728T030744
CREATED:20150929T190812Z
LAST-MODIFIED:20150929T190812Z
UID:3746-1444845600-1444856400@www.metalsmith.org
SUMMARY:October 14 Membership Meeting
DESCRIPTION:The October 14\, 2015 TGoM membership meeting will be held once again at the Jackson Street Roundhouse–Minnesota Transportation Museum in St. Paul\, Minnesota. More details coming soon!
URL:https://www.metalsmith.org/event/october-14-membership-meeting/
LOCATION:Jackson Street Roundhouse\, 193 Pennsylvania Avenue East\, St. Paul\, MN\, 55130\, United States
CATEGORIES:Meeting,Upcoming
ORGANIZER;CN="Gordon Barr":MAILTO:agbarr@metalsmith.org
END:VEVENT
END:VCALENDAR