Skip to content

Herb Fick

Phone 507 663 0569

Events from this organizer

Today

  • Handled Struck Tools 2017

    MN School of Horseshoeing 6250 Riverdale Drive, N.W., Anoka, MN, United States

    Handled Struck Tools Workshop Minimum six students. Maximum eight students. Instructors: Jesse Gavin, lead, assisted by Dave Gavin, Herb Fick, and probably others! The tools made will be punches with a wire handle and chisels with a wire handle. We will offer the option to used treadle hammers supplied by the teaching staff. (Find out…

  • Struck Tools Workshop 2018

    MN School of Horseshoeing 6250 Riverdale Drive, N.W., Anoka, MN, United States

    Instructor: Jim Scott Struck tools Class size: 8 max, 5 minimum The day will include: Prepare a punch, a slitting chisel and a drift using approximately 5/8 inch round stock. We will fabricate normal length (6 to 8 inches) hand held tools without handles. We will heat treat using oil. We will have trainers who…

    $60

  • August 2018 Membership Meeting

    Dan Pate's Shop 35730 Hiway 56 Blvd, Dennison, MN, United States

    Annual corn feed/hog roast comin’ right up! Guild of Metalsmiths membership meeting at Dan Pate’s shop August 8 Where: Dan Pate’s shop on Minnesota Hiway 56. Just three miles south of the Stanton airport at 357th street. Dan Pate does auto development and restoration. Again, last year while we were cleaning up the mess on…

  • Handled Struck Tools Workshop 2018

    MN School of Horseshoeing 6250 Riverdale Dr, NW, Ramsey, MN, United States

    Instructors: Jesse (lead instructor) and Dave Gavin, other Handled struck tools Minimum six students Maximum eight. The tools made will be punches with a wire handle and chisels with a wire handle. We will offer the option to use treadle hammers supplied by the teaching staff. (Find out if you really need one of these…

    $85

  • Struck Tools Workshop 2019

    MN School of Horseshoeing 6250 Riverdale Dr, NW, Ramsey, MN, United States

    Instructor: Jim Scott Class size: 8 max, 5 minimum The day will include: Prepare a punch, a slitting chisel and a drift using approximately 5/8 inch round stock. We will fabricate normal length (6 to 8 inches) hand held tools (no handles). We will heat treat using oil. We will have trainers who offer all…

    $70

  • August 2019 Membership Meeting

    Dan Pate's Shop 35730 Hiway 56 Blvd, Dennison, MN, United States

    Next TGoM membership meeting set for Wednesday, August 14 Venue: The Dan and LuAnn Pate estate. The Date: Second Wednesday in August. Time: Serving at 6:30 pm, business meeting following dinner (brief). Activities start about 8 AM. Lunch is on your own; sometimes we miss it. Demo: Right now I have two offers for a…